User Manual

16
Step – 3: Correctly place the layer (Item # 1) back on the base by sliding the Locking notches into the Notch Holders see Fig – 5 and
5A. Similarly place the Housing Cover Top and make sure to align the notches for correct assembly as seen in Fig – 5B. Lock the Layer
and Top Cover with the Locking Assembly (Item # 7,8 or 9) as seen in Fig – 5C. Now you are ready to put the 1" MPT x 90 Degree
Elbow (Item #18) on the Locking Nut.
Step – 4: Place the UV Light Solid Cover. Align the two notched and slide in the cover. Lock it in place using the nut. See Fig – 5A, 5B
and 5C
R440028 13 WATT UV STERILIZER KIT
Upgrade your Uno, Duo, Trio Filters with a 13 Watt UV to control Algae and Disease Control. Complete easy-to-install unit shipped
direct from factory.
To Add a UV Sterilize, a Pump or for any replacement parts – Please call the manufacturer at:
Lifegard Aquatics
16301 Carmenita Road
Cerritos, CA 90703
Tel [phone]
Fax [phone]
Email: [e-mail] Web Site: www.lifegardaquatics.com
Item Part No. Description
11 R442011 UV Chamber
12 R442012 UV Chamber Screws
13 R442013 13 Watt UV Bulb
14 R442014 13 Watt UV Ballast Assembly
15 R442015 UV Quartz Sleeve
16 R442016 Gasket for UV Quartz Sleeve
17 R442017 “O” Ring for Internal UV Housing
19 R442019 UV Light Cover with Nut
Fig
–
5
Fig
–
5A
Fig
–
5B
Fig
–
5C
Fig
–
5A
Fig
–
5B
Fig
–
5C