User Manual

The ALL IN ONE FILTER SYSTEM is a compact filter for ponds, water gardens and fountains easy to install and designed

for easy maintenance. Besides offering 2 different fountain spray patterns, it performs three different filtering functions:

1. Multi Layer MECHANICAL Filtration to remove solids.

2. BIOLOGICAL Filtration to promote beneficial bacterial growth.

3. ULTRAVIOLET STERILIZATION puts out 13 Watts of intense UV light to kill free floating algae. The ultraviolet sterilizer

has a separate plug so that you can operate it only when needed.

Setup and Maintenance: Please refer to the parts guide for individual part’s explanation.

Initial Setup:

Step – 1: Remove the Layer Locking Assembly (Item # 7,8,9) that is holding down the Housing Cover Top. Take off the

layer (s) (Item # 1) by gently sliding out the locking Notches (as see in Fig. 1)

Inspect the Pump (Item # 24)and UV Chamber (Item # 11). Both should be locked in place. The Biological Media bag

(Item # 10) should be placed by the UV Chamber Opening and the pump base should be locked in place. The O-Ring on

the Pump to UV Chamber Adapter (Item # 22) should be in position on the grey pump volute and properly inserted into

with UV Chamber Housing (as seen in Fig. 2).

Locking Notches

Notch Holder

Fig. 1

Fig. 2

Rubber Cord Grommet

Fig. 2A