Owner's Manual

STEP 2:
Install two Ø 27xØ 13.5 Nut Caps (48) onto M8 Lock Nuts (15). Slide one Protective Cover (37) on to
each side of the base as shown, and pull down on the Protective Covers (37) until the bottom of
the covers are slightly lower than the Left and Right Folding Arms (8L, 8R). Use the velcro straps
on the bottom of the Protective Covers (37) to secure the covers to the Left and Right Folding
Arms (8L, 8R). When the covers are assembled correctly, the Left and Right Folding Arms (8L, 8R)
should be fully covered by the Protective Covers (37).
8
37
2
1
INVERSION
T
ABLE
48
15
48