Operation Manual

16
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover at the rear of computer.
2. Place one "SIZE-AAA" battery into the battery housing.
3. Insure battery is correctly positioned and battery spring is proper contact with battery.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appear, remove battery and wait 15
seconds before reinstalling.
ADJUSTMENTS
Adjusting the Tension Control Knob
To increase the load, turn the tension control knob in a
clockwise direction.
To decrease the load, turn the tension control knob in a
counterclockwise direction.
Adjusting the Rear Stabilizer End Cap
Turn the rear stabilizer end cap on the rear stabilizer as
needed to level the elliptical trainer.
Tension Control Knob
Rear Stabilizer End Cap