Operation Manual

12
4. Computer Installation
Remove four M5x12 Bolts (39) from the back of the Computer (9). Remove bolts with the
Multi Hex Tool with Phillips Screwdriver provided.
Connect the Extension Hand Pulse Sensor Wires II (63) and Extension Sensor Wire (64) to
the wires that come from the Computer (9). Tuck wires into the Front Handlebar Post
(6).
Attach the Computer (9) onto the top end of the Front Handlebar Post (6) with four M5x12
Bolts (39) that were removed. Tighten bolts with the Multi Hex Tool with Phillips
Screwdriver provided.
39
13
6
9
63
64
Tool:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15