Operation Manual

13
5. Seat and Back Cushions Installation
Remove eight M6x15 Bolts (21) and eight Ø6 Flat Washers (58) from the back of the Seat
and Back Cushions (7, 8). Remove bolts with the Multi Hex Tool with Phillips Screwdriver
provided. Then attach the Seat and Back Cushions (7, 8) onto the Backrest Support
Bracket (1) with eight M6x15 Bolts (21) and eight Ø6 Flat Washers (58) that were removed.
Tighten bolts with the Multi Hex Tool with Phillips Screwdriver provided.
Tool:
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
8
58
21
1
3
7
58
21