Operation Manual

15
ADJUSTMENTS
Adjusting the Tension Control Knob
To increase the load, turn the tension
control knob in a clockwise direction.
To decrease the load, turn the tension
control knob in a counterclockwise direction.
Adjusting the Rear Stabilizer End Cap
Turn the rear stabilizer end cap on the rear
stabilizer as needed to level the recumbent
bike.
Adjusting the Seat Forth or Back
Turn the round knob in a counterclockwise
direction until it can be pulled out. Pull out
the round knob and then slide the rear main
frame forth or back direction to the suitable
position. Lock the rear main frame in place
by releasing the round knob and sliding the
rear main frame forth or back slightly until
the round knob "pops" down into the locked
position. For added safety, tighten the
round knob in a clockwise direction.
NOTE: When adjusting the rear main
frame back or forth, make sure the
bushing does not exceed the mark line
on the rear main frame.
Tension Control Knob
Rear Stabilizer End Cap
Round Knob