Operation Manual

ASSEMBLY INSTRUCTIONS

1. Front and Rear Stabilizers Installation

Position the Front Stabilizer (6) in front of the Main Frame (1) and align bolt holes.

Attach the Front Stabilizer (6) onto the front curve of the Main Frame (1) with two M10 Cap

Nuts (34), two M10x57 Bolts (35), and two Ø10 Big Curve Washers (36). Tighten cap

nuts with the Multi Hex Tool provided.

Remove four M8x15 Bolts (24) and four Ø20xØ8 Curve Washers (57) from the Rear

Stabilizer (4). Remove bolts with the 5mm Allen Wrench provided.

Insert the Rear Stabilizer (4) into the tube of the Main Frame (1) and align bolt holes.

Attach the Rear Stabilizer (4) into the tube of the Main Frame (1) with four M8x15 Bolts (24)

and four Ø20xØ8 Curve Washers (57) that were removed. Tighten bolts with the 5mm

Allen Wrench provided.

Hardware:

(34) Cap Nut M10

2 PCS

(35) Bolt M10x57

2 PCS

(36) Big Curve Washer Ø10

2 PCS

Multi Hex Tool

Allen Wrench 5mm

Tool: