User's Manual

20
orange Message button after you have completed the range test. Begin
Signal Range Test.”
6. Press your Help Button. The Home Communicator will beep and the
light on your Help Button will ash green to indicate that the Home
Communicator has received the signal.
7. Move to other parts of your home and press your Help Button again.
Listen for the beep and check to see if the green light is ashing.
8. Once you have tested different locations in your home and
immediately outside your home, return to the Home Communicator
and press the ashing orange Message button.
Cleaning
Your Help Button is waterproof (IPX7 or up to 1 meter or 3 feet), so you
can submerge it in warm water for easy cleaning.
1. Wash your neck cord with a mild liquid dishwashing detergent.
2. Wash the Help Button under warm running water, being careful
not to accidentally press the Help Button. You may also gently wipe
your AutoAlert Help Button with an isopropyl (rubbing) alcohol wipe
or a cotton pad moistened with alcohol. However, do not soak it in
the alcohol.
3. Blot excess moisture with a towel and allow the Help Button to nish
air-drying while you’re wearing it.
4. If you accidentally push your Help Button during cleaning and a Help
Call is placed, please simply tell the Personal Response Associate that
you accidentally pressed the button.