Use Instructions

33
Questions? Call 1-800-635-6156
re-orient to its new location. To exit Sleep Mode, press
the Help Button once and release it. Your Pendant will say:
“Your Help Button is now ready to use. If you need help,
please press your Help Button again”. This initial button press
that wakes the Pendant out of Sleep Mode will not initiate a
Help Call. If you need help in this instance, be sure to press the
Help Button a second time.
Caution
You will not be able to send a Help Call when the Pendant is
in Sleep Mode. Be sure to remember to exit Sleep Mode as
soon as wireless/electronic device use is allowed, e.g., after
the airplane has landed.
Note: If you are returning a GoSafe 2 Mobile Pendant to Philips
Lifeline for service, replacement or recycling, you must contact
Philips Lifeline at the number at the bottom of the page prior
to returning it. Philips Lifeline will provide you with special
packaging and instructions for return to help ensure that the
Pendant does not send help signals while in-transit. Do not
ship the Pendant without notifying Philips Lifeline that you are
doing so.
Recommended usage
• Press the Help Button on your Pendant any time you need
help, or in situations/locations outside the home where you
want to determine if the AT&T wireless network is available.
• Wear your Pendant at ALL times, at and away from home.
The GoSafe 2 Mobile Pendant can send a Help Call from
any location where the AT&T wireless network is available.
MHB3_7250_IFU 2020c.indd 33 2/15/21 2:28 PM