Use Instructions
35
Questions? Call 1-800-635-6156
GoSafe 2 Mobile Pendant – Alarms
Introduction
There are two types of alarms processed by the GoSafe 2
Mobile Pendant.
• High Priority – Require immediate response
(by the Response Center)
• Medium Priority – Require prompt response
(by the operator/User)
Additionally, the Pendant also plays verbal informational
messages and conrmation alerts that notify you of conditions
that need attention but do not qualify as alarm conditions (e.g.
installation prompts).
Note: If multiple alarms occur at the same time, all alarms
are processed and displayed, but the alarms are ordered rst
by priority and then by occurrence, with the newest, highest
priority alarms at the top of the list. The alarm precedence
is in the following order: high priority, medium priority, and
informational messages.
Note: Not all alarms are available in every mode (e.g. during
installation); some alarms are mode-dependent.
Audible and Visual Alarm Indicators
When the Pendant detects a High priority alarm: The Indicator
Light on the Pendant ashes red, the device audible alarm
sounds and a recorded voice message is played.
When the Pendant detects a Medium priority alarm: The light
on the Pendant ashes orange, the Pendant may play a chime
and/or a voice prompt.
MHB3_7250_IFU 2020c.indd 35 2/15/21 2:28 PM