Use Instructions

37
Questions? Call 1-800-635-6156
response. If an alarm is accidentally initiated by the User, they
should not put the Pendant in Sleep Mode to try to cancel the
alarm. Instead, the User should wait for the Response Center
to establish voice communication and simply state that no help
is needed.
The GoSafe 2 Mobile Pendant self-cancels certain Medium
Priority alarms if the cause of the alarm is corrected, stopping
the orange ashing Indicator Light from illuminating.
Alarm Descriptions / Summary Tables
Help Needed – 7250 MHB
Alarm Event
Description
Help Alarm initiated by the User pressing the Help
Button on the End Device.
Priority High
Device Action Operates normally
Alarm Event
Reported/
Displayed
Locally?
Yes. Upon pressing the Help Button on the End
Device, a Voice Message plays and the Indicator
Light LED ashes red.
Alarm Event
Reported to
Philips Lifeline?
Yes. A Help Alarm Signal is sent to the Response
Center by the End Device from anywhere wireless
signal is available on the AT&T wireless network.
Upon receiving the Help Signal, the Response
Center calls the End Device to establish contact
with the Subscriber and to see what kind of help
they need.
MHB3_7250_IFU 2020c.indd 37 2/15/21 2:28 PM