TDS

TECHNICAL DATA SHEET
Effective: October 25, 2018 Page 1 of 1 [phone] | homedepot.com
PHYSICAL PROPERTIES (FLOATING MULTILAYER MODULAR FLOORING) - 8.0MM GAUGE
Collection Plank - XL Plank - XXL
Size
8.7”x59.4” (220mm x 1510mm) 8.7”x72” (220mm x 1828.8mm)
Overall Gauge 8.0mm (0.315”) 8.0mm (0.315”)
Wear Layer 12mil (0.3mm) 21.7mil (0.55mm)
Top Layer 2.0mm (0.079”) LVT 2.0mm (0.079”) LVT
Core 5.0mm (0.197”) Rigid Core 5.0mm (0.197”) Rigid Core
Pad 1.0mm (0.039”) HDPE 1.0mm (0.039”) HDPE
Use Light Commercial & Residential Light Commercial & Residential
Profile Micro-Bevel Bevel
Finish Enhanced Ceramic Bead Enhanced Ceramic Bead
Ultra-Fresh Included in Finish and Pad Included in Finish and Pad
Embossing(s) In-Register In-Register, Natural Timber
Pieces/Carton 6 pieces 6 pieces
Coverage/Carton 21.45 Sq.Ft. (1.99 Sq.M.) 25.98 Sq.Ft. (2.41 Sq.M.)
Limited Warranty
Light Commercial - 10 Years
Residential - Lifetime
Light Commercial - 10 Years
Residential - Lifetime
STANDARDS – SAFETY & PERFORMANCE
Standard Description Requirements Results
ASTM E648
Critical Radiant Flux (Radiant Panel) Class I: ≥ 0.45 W/cm
2
Passes Requirements
1
ASTM E662 Smoke Density Flaming & Non-Flaming ≤ 450 Passes Requirements
2
ASTM D2047 Coefficient of Friction (Slip Resistance) Not Applicable (No Official Requirements) ≥0.6 (Dry)
ASTM F970 Static Load
Plank - XL: No Requirements
Plank - XXL: ±0.005”, 250psi
Plank - XL: Not Applicable
Plank - XXL: Passes Requirements
SIM Test Static Load Limit Test to Limit (±0.005”) ≥500psi
ASTM F2199 Dimensional Stability
Plank - XL: ≤0.25% / lineal ft.
Plank - XXL: ≤0.2% / lineal ft.
Plank - XL: Surpasses Requirements
Plank - XXL: Surpasses Requirements
ASTM F925 Chemical Resistance No more than “Slight Change” Surpasses Requirements
ASTM F1514 Resistance to Heat Average ΔΕ < 8.0 Surpasses Requirements
ASTM F1515 Resistance to Light Average ΔΕ < 8.0 Surpasses Requirements
ASTM G21 Antifungal Activity Not Applicable (No Official Requirements) Top: 0-1; Bottom: 0-1
3
ASTM F963 Heavy Metals Refer to Standard Passes Requirements
ASTM D7823 Phthalates Refer to CPSIA
4
Passes Requirements
ASTM F410 Wear Layer Thickness
Plank - XL: No Requirements
Plank - XXL: ≥0.020” (0.5mm)
Plank - XL: Not Applicable
Plank - XXL: Passes Requirements
STANDARDS – SOUND
Assembly ASTM E90 ASTM E492 ASTM E2179 Results (Remarks)
6” Concrete Slab
STC 50 IIC 50 ΔIIC 24
All tested assemblies pass IBC
5
requirements of
STC ≥ 50 and IIC ≥ 50 for multi-story dwellings
8” Concrete Slab STC 53 IIC 55 Not Applicable
6” Concrete Slab with Drop-Ceiling STC 62 IIC 70 Not Applicable
Notes
1) ASTM E648 - Critical Radiant Flux (Radiant Panel): Passes Requirements for Class I per International Building Code (IBC) 2018 & NFPA 101 Life Safety Code
2) ASTM E662 - Smoke Density: 450 is the limit established by many state, county, and/or local building and/or fire codes, but is not set as a limit for (resilient) flooring products
nationwide. Thus, Smoke Density requirements for flooring products may vary from jurisdiction to jurisdiction.
3) ASTM G21 - Antifungal Activity: Top Surface (LVT Top Layer) and Bottom Surface (Pad) scored 0-1 (No Growth to <10% Growth)
4) CPSIA = Consumer Product Safety Improvement Act
5) IBC = International Building Code
Ultra-Fresh is a registered trademark of Thomson Research Associates, Inc.