Installation Guide

4. Use approved/recommended adhesives and seam sealers when installing Light Commercial vinyl ooring,

including Roberts 2310 adhesive and Armstrong S-761 acrylic seam sealer or MaxGrip Installation tape

if applicable.

5. Ensure vinyl ooring is installed in an environment that maintains a temperature range between 65° to 85°

Fahrenheit (18° and 29° Celsius) 24 hours before, during and after installation.

6. Inspect ooring material prior to installation for any imperfections or manufacturing related defects.

Tra󰮐cMaster oorings receive extensive testing and visual examination in an attempt to assure your

shipped oor is always rst quality. It is the responsibility of the installer/end user to conrm the received

material is free of any obvious visible conditions that may be detrimental to the appearance and/or

performance of the product.

• Minor color, shade and/or texture variations are normal. Any variances between actual material,

product samples and/or brochures should be addressed with the manufacturer prior to installation.

7. Support furniture with wide, weight-bearing, smooth non-staining plastic oor protectors or non-staining

felt pads. The protectors/pads should be at least one inch in diameter and rest at on the oor. The heavier

the item, the wider the oor protector should be. Non-staining felt pads should be inspected periodically

and maintained with respect to the amount of foot tra󰮐c to remove imbedded material to avoid abrasion.

8. Perform proper cleaning and maintenance regularly and as needed. See Light Commercial Care and

Maintenance Guidelines (p.15) for details.

General Light Commercial Limited Warranty Conditions & Owner Obligations

This document is reviewed on an ongoing basis. 10/10/14