BLOOD GLUCOSE MONITORING SYSTEM Owner's Booklet One Touch ll

Chapter 8, Cleaning and
Maintaining the Meter. For
further assistance, call the
LifeScan Technical Service
Department toll-free.
Canada 1 800 663-5521
U.S.A. 1 800 227-8862
The next time you turn on
your Meter
code 7
redo A
(example)
will appear, indicating your
Check Strip was out of
range at the last reading.
This message will continue
to appear each time the
Meter is turned on until you
perform a Check Strip
reading that falls in the
acceptable range.
Cleaning and Maintaining
the Check Strip
u
✔
Check that the white
and purple surfaces of the
Check Strip are clean; if
needed, wipe with a soft
cloth or tissue dampened
with water. Dry thoroughly.
u
✔
Do not put blood,
alcohol, Control Solution,
or any other fluid (except
water) on your Check Strip.
u
✔
Avoid scratching the
white and purple surfaces of
the Check Strip.
CAUTION: Your blood
glucose test result may
be inaccurate if your
Check Strip reading
does not fall in the
acceptable range.
• 17 •
LSI-97-051 OT2.bklt.C.Eg 10/8/97 3:10 PM Page 17 (1,1)