User's Manual Part 2

USING YOUR SECURITY SYSTEM

[www.LifeShield.com]

[61]

Suppressing Trouble Sounds

You can only suppress Trouble

Sounds when the system is dis-

armed.

If you suppress Trouble Sounds

after a first trouble condition, and

then a second trouble condition

occurs, Trouble Sounds will start

again. This might happen, for ex-

ample, if you lose AC power, and

then lose Internet a few minutes

later.

The system provides Trouble Sounds to alert the user that it requires attention. Trouble Sounds can be generated as a result of

a low battery, the loss of Internet or phone connection, etc. You can limit the hours during the day when Trouble Sounds are

sounded and you can temporarily suppress the sounds until you can address the trouble condition.

Suppressing Trouble Sounds (Handset/Console)

To suppress a Trouble Sound while it is occurring, on a Handset or Console :

1. Press CANCEL/OFF

2. Press OK

You can control the length of time that Trouble Sounds are suppressed (when you press CANCEL/OFF), on a Handset or Console:

1. Press MENU

2. Scroll to Security Setup, press SELECT

3. Enter your Master Code

4. Scroll to Suppress Trouble, press SELECT

5. Scroll to the desired setting (The settings range from 0 to 48 hours. Factory default is 24 hours.)

Setting the Time of Day when Trouble Sounds are Disabled (via www.LifeShield.com)

You can control the hours of the day when Trouble Sounds are disabled/silenced, such as while you are sleeping. Some condi-

tions, like No Internet or No AC are brief and corrected quickly by the utility and you may not want to be awakened. Note that

there must be at least 1 hour per day when Trouble Sounds are not silenced. (Figure 39):

1. Go to www.LifeShield.com

2. Enter your User Name and Password

3. Click Settings

4. Navigate to System Settings

5. Click Edit

6. Select desired Trouble Silence Start and End Time

7. Click Continue

8. Click Submit when requested

Figure 39. LifeShield - Edit System Settings Screen