User's Manual Part 2

USING YOUR TELEPHONE SYSTEM
[www.LifeShield.com]
[81]
Answering System Operation
i
The factory default for the An-
swering System is OFF .
t
Notifications of new messages
are displayed on the third line of
the Handset or Console main
display and by the blinking blue
light next to the TALK/END key.
The LifeShield system includes a built-in, full-featured telephone answering system. You can customize and operate the system
through the Handset, Console or remotely from another telephone.
The features of the answering system are listed below:
• Digital Recording (no tape)
• Up to 12 Minutes of Recording Time
• Call Screening
• Personal or Prerecorded Greetings
• Time and Day Announcement
• Remote Message Retrieval
• Toll Saver
• Message Alerts
• At Home Retrieval of Messages by any LifeShield Telephone
Enable Answering System
The Answering System can be enabled from either the Answering System Settings or Answering System Operating
Menu.
To enable Answering System from the Answering System Settings:
1. Press MENU
2. Scroll to Phone Setup, press SELECT
BACK SELECT
Intercom
Security Setup
Phone Select
BACK SELECT
Answer System
Answer Enable
Number of Rings
BACK SELECT
Answer System
Off
On
Answer System
Off
On
Phone Setup
Handset
Answer System
3. Scroll to Answer System, press SELECT
4. Scroll to Answer Enable, press SELECT
5. Scroll to the desired setting, press SELECT (Example: On)
To enable Answering System from the Answering System Operating Menu:
1. Press #
2. Press 6