User's Manual Part 2

USING YOUR TELEPHONE SYSTEM
[www.LifeShield.com]
[88]
Setting Up an Intercom Session
Intercom
Console 1
BACK SELECT
Intercom To
Consle 1
Connecting
CANCEL
Intercom From
Handset 1
ANSWER
The Intercom feature allows a 2-way conversation between 2 LifeShield phones (Handset or Console) in your system. The
Intercom is available as long as the receiving phone (Handset or Console) is not in use.
Setting Up an Intercom Session
To establish an Intercom session:
On the Calling Phone:
1. Press MENU
2. Scroll to Intercom, press SELECT
3. Scroll to the desired Receiving Phone, press SELECT (Example: Console 1)
i
Either party may end an Intercom
session by selecting the End key.
If the requested device is being
used when an Intercom session is
started, the originating device will
show “Unavailable” on the
display and sound an error beep.
Example: Calling Phone Display
Example: Calling Phone Display
Example: Receiving Phone Display
4. Both LifeShield phones will display a
message that says Connecting
5. Both LifeShield phones will beep and the dis-
play will indicate: Intercom From:
(Example: Handset 1)
6. Both LifeShield phones indicate an Intercom
call is in progress
Ready to Arm
Thu 2/8 11:48a
Intcm: Handset 1
END
Ready to Arm
Thu 2/8 11:48a
Intcm: Console 1
END
If the phone rings while an Intercom call is in progress
the Intercom call can continue or the incoming call can be
answered. The display will show Ringing and show
Caller ID information, if available.
7. To end the Intercom session and answer the call,
either user can press TALK/END or SPKR on the
Handset or Console