User's Manual Part 2

USING YOUR TELEPHONE SYSTEM
[www.LifeShield.com]
[89]
Setting Up Room Monitoring
The Room Monitor feature allows you to monitor sounds in another room, such as a nursery.
Setting Up Room Monitoring
To set up Room Monitoring:
1. With Console in one room (Receiver Phone), place another LifeShield phone (Example: Handset 1) in the room you would
like to monitor (Monitored Phone).
On the Receiver Phone:
2. Press MENU
3. Scroll to Room Monitor, press SELECT
4. Scroll to the Monitored Phone, press SELECT (Example: Handset 1).
Room Monitor
Handset 1
BACK SELECT
Example: Receiver Phone Display:
Example: Receiver Phone Display:
5. This selection will connect the 2 LifeShield phones. The message Connecting appears on the display.
Example: Receiver Phone Display Example: Monitored Phone Display
6. When the phones are connected, their names appear on each other’s display.
RmMon To:
Handset 1
Connecting
CANCEL
Ready to Arm
Thu 2/8 11:48a
RmMon: Console 1
END
Ready to Arm
Thu 2/8 11:48a
RmMon: Handset 1
END
i
If the phone rings, it can be
answered from either device by
pressing the TALK button on the
Handset or Console, or the
SPEAKER key on the Handset.
A room monitoring session is
terminated by pressing the END
key on either device.
In the Room Monitor mode,
2-way communication is not
possible.