User's Manual Part 2

Glossary
SUPPLEMENTAL INFORMATION
[www.LifeShield.com]
[94]
LifeShield.com
www.LifeShield.com provides complete control, configuration, and status of your system from any PC or Mac Internet browser.
Master Code
One Master Code is supported, which you entered as part of your activation process. Only the Master Code can be used to change your system settings, such as
creating, editing and deleting other User Codes.
Mobile LifeShield
mobile.LifeShield.com can be accessed from any web enabled mobile device to arm/disarm, check system status, recent events, and access cameras. Must be
first enabled in www.LifeShield.com under top status panel, Quick Links, Preferences.
One Touch Arming
When enabled on www.LifeShield.com the system can be armed by pressing and holding Stay, Away, or Instant on the Handset or Console without entering your
User Code. The factory default is Off.
PANIC Alarm
A PANIC Alarm generates an alarm and the Alarm Monitoring Center contacts emergency authorities without phone call verification. The PANIC Alarm is generated
by pressing the PANIC button located on the Handset and Console.
Phone Book
The built-in phone book can store up to 99 telephone numbers and/or Caller ID messages.
Practice
After a system is activated, it is in Practice mode for 7 days. Practice mode allows you to learn the system without causing false alarms. During this time you are
"Not Monitored" and there will be NO dispatch of authorities.
Remote Access
Your LifeShield system allows you to dial in to your home from any cell phone or telephone to arm, disarm or control other aspects of your system.
Room Monitor
The Room Monitor allows for monitoring sounds in another room by use of LifeShield Handsets and Consoles.
Sensors
Sensors monitor events and, when detected, report the event back to the LifeShield System.
Sensor Brackets
The hardware used when mounting the Sensors.
Sensor Extensions
Sensor Extensions are used if your door frame does not provide enough room for mounting the Sensor bracket. Sensor Extensions allow you to place a Sensor in
an area up to 18” away where more room is available.
Sensor Magnets
Magnets are used with door/window Sensors. Magnets are attached to a door or window, while the Sensor is attached to a door or window frame.
STAY
Arm Stay while you are at home. A silent Exit Delay and an audible Entry Delay is supported. An audible Exit Delay can be enabled on LifeShield.com.
User Codes
User Codes can arm and disarm your system, but cannot access or change your system settings.