User's Manual Part 2

System Messages
SUPPLEMENTAL INFORMATION
[www.LifeShield.com]
[104]
Table 10: Telephone Display Status Messages
Telephone Display Status Messages
The following table lists and describes the Telephone Display Status Messages of your LifeShield Home Security system.
Display Message Display Description
Calls: 0 Msg: 0 Calls: The number of new calls. Msg: The number of messages.
Line in Use Message displayed on the LifeShield phones that are not in use when one of the other phones in your home is being used.
Out of Range Message displayed if you are out of range of the LifeShield phone base and try to make a call on your Handset.
Ringing
Message displayed when there is an incoming call prior to either you picking up the call or the Caller ID being engaged.
(Caller ID may be available from your phone service provider.)
Call Screening
Message displayed during a call if you have activated Call Screening on your telephone. During Call Screening, incoming calls
are sent to the Answering System. While the call is being recorded, it is presented to you on the speaker phone. Your phone has
Call Screening deactivated as the factory setting. You can activate it through the Menus on your phone.
Talk 1:23:45 Message displayed when you are actively talking on a LifeShield Phone. The running duration of the call is also displayed.
Spkr 1:23:45
Message displayed when you are actively talking on a LifeShield Phone (Handset Only) and put the call on the Speaker.
The running duration of the call is also displayed.
Muted 1:23:45
Message displayed when you are actively talking on a LifeShield Phone and place the call on Mute. The running duration of
the call is also displayed. Mute is activated by selecting the Mute button on the Handset.
Call on Hold Message displayed when you are talking on a LifeShield phone and have selected to put the caller on hold.
Privacy Active
Message displayed if you have activated Privacy on your phone system. If you are talking on the phone, another family member
will not be able to join the call from another phone when Privacy is activated. Your phone system has Privacy deactivated as the
factory setting out of the box. It can be activated through the menus on your phone.
Do Not Disturb
Message displayed when you have the Do Not Disturb feature activated on your phone system. The LifeShield phone ring will be
muted when activated. Your phone system has Do Not Disturb deactivated as the default factory setting out of the box. It can be
activated through the menus on your phone.
Paging Message displayed when you attempt to use the LifeShield phone to page another LifeShield phone.
Unavailable
Message displayed when you attempt to use the LifeShield phone’s intercom feature and the other LifeShield phone you are
trying to reach is unavailable.