Setup Manual

STAY ARMING AWAY ARMING
INSTANT STAY
ARMING
DISARMING
PANICKING
YOUR SYSTEM
DEFINITION
Use while you are staying
in your home. Your system
will provide a silent Exit
Delay and an audible
Entry Delay. This mode will
also ignore specific sensors
inside the home such as
your Motion Sensors.
Use when no one is at
home. Your system will
provide an audible Exit
Delay. The beep will
increase during the last 10
seconds of arming.
Use when you are in for
the night and not expecting
anyone to enter or exit the
home. Your system will not
provide an Exit Delay or
Entry Delay. This mode will
ignore specific sensors such
as your Motion Sensors.
Use this whenever you
want to cancel any alarm
you’ve caused.
Use this when you want to send
a signal to the monitoring center
immediately. The PANIC button
will send a message to the Alarm
Monitoring Center to contact the
authorities without making a call to
you to verify the alarm.
NOTE: Do not test your system with the
Panic Button.
CONSOLE
t Press STAY on your
Console and enter
your Master Code*
tYour system is armed
when the Exit Delay
has expired
tPress AWAY on your
Console and enter your
Master Code*
tYour system is armed
with the Exit Delay has
expired
NOTE: If a door doesn’t open
and close during the exit delay,
the system will automatically
switch the arming mode to STAY
tPress INSTANT on your
Console and enter your
Master Code*
tPress CANCEL/OFF
on your Console and
enter your Master
Code*
tPress and hold PANIC for
2 seconds (if enabled)
tSelect Police, Fire, or Medical
(if no selection is made, “Police”
will be default selection)
KEYCHAIN
REMOTE
tPress and hold STAY
on the Keychain Remote
for 2 seconds
tThe system will respond
with a blinking light and
a beep letting you know
your system is armed
tPress and hold AWAY
on the Keychain Remote
for 2 seconds
tThe system will respond
with a blinking light and
a beep letting you know
your system is armed
Not available on the
Keychain Remote
tPress Cancel/OFF
to disarm the system
before entering
tThe system will respond
with a light and a beep
letting you know your
system is disarmed
tPress and hold STAY and
AWAY at the same time for
2 seconds (if enabled and
you’re near your home)
SECURITY PORTAL
(LIFEVIEW WEB)
tLogin to
lifeview.lifeshield.com
tAt the top of the
webpage, click the icon
of the house with a
person inside of it
labeled “STAY”
tLogin to
lifeview.lifeshield.com
tAt the top of the
webpage, click the icon
of the empty house
labeled “AWAY”
tLogin to
lifeview.lifeshield.com
tAt the top of the
webpage, click the
icon of the Shield
labeled “INSTANT”
tLogin to
lifeview.lifeshield.com
tAt the top of the
webpage, click the
DISARM button
Not available through
the Security Portal
MOBILE APP
tDrag the lock icon to
the STAY arming symbol
(the house with a person
and clock)
tEnter your Master Code*
tDrag the lock icon to the
AWAY arming symbol (the
house with the shield)
tEnter your Master Code*
tDrag the lock icon to the
INSTANT arming symbol
(the house with a person
and lightning bolt)
tEnter your Master Code*
tDrag the lock icon to
the Unlock icon labeled
“Disarm”
tEnter your Master Code*
Not available on the
Mobile Application
SECURITY TABLET/
TABLET APP
tDrag the lock icon to
the STAY arming symbol
(the house with a person
and clock)
tEnter your Master Code*
tDrag the lock icon to the
AWAY arming symbol
(the house with the
shield)
tEnter your Master Code*
tDrag the lock icon to the
INSTANT arming symbol
(the house with a person
and lightning bolt)
tEnter your Master Code*
tDrag the lock icon to
the Unlock icon labeled
“Disarm”
tEnter your Master Code*
tPress and hold the PANIC
button in the upper right hand
corner of the screen
tChoose your type of Panic
tWill only work when the device is
in the same wireless network as
your system (will be grayed out)
Control Your System
*Your master code can be found on the inside cover of this Setup Guide

4]`b`]cPZSaV]]bW\U^ZSOaSdWaWbsupport.lifeshield.com/keychain-trouble