User's Manual

Install/Replace Battery
The Key Chain Remote uses a replaceable 3V lithium battery. This will
provide years of life under normal use.
Begin by opening the remote control cover by prying the top from the
bottom with a coin in the slot provided.
Slot for opening the remote
If a battery is already installed, remove the old battery by gently pushing
it out of the holder.
Next, insert the battery in the battery holder with the plus + sign up. This
should match the marking on the battery holder.
Insert battery and snap the top
and bottom back together
After installing the battery, snap the top and bottom back together.
Install/Learn the Key Chain Remote Control
1. Using the Programmer, navigate to “Learn Devices”, then “Learn
Key Fob”. Registration will be enabled for 15 seconds only. The
Programmer will display: