Full Product Manual

19
SPA MAINTENANCE
SURFACE CARE
Do not use solvents or abrasive cleaners to clean the spa. Typically, a mild detergent and water
will resolve cleaning issues.
COVER CARE
Please keep your cover free from dirt at all times. Use a cover cleaner or a warm mild soapy water
to clean the surface. Do not use any silicone-based products, as it will dry and may eventually
crack the vinyl.
NOTE: Do not stand on the cover at any time. Remove the cover when adding chemicals to your
spa. This will extend the life of your cover. The gases from burned off chemicals will be trapped
under the cover, if not removed. These gases will eat away at the protective lining of the foam
inserts. This will not be covered under warranty.
CABINET CARE
Little maintenance is required to keep your spa cabinet looking good.
Spa cabinet product should be cleaned as needed to remove dirt and debris.
• NO abrasive or harsh chemicals should be used on your spa's cabinet.
• NO solvents or cleaners containing aromatic solvents should be used on your spas cabinet.
• Hot soapy water is the best choice for cleaning your spa's cabinet.
AVOID PROLONGED EXPOSURE TO DIRECT SUNLIGHT OR EXCESSIVE TEMPERATURES
100ºF (38ºC) to avoid your spa cabinet from buckling.
SPA LED LIGHT REPLACEMENT
• Turn OFF the power to the spa.
• Remove the equipment compartment access door.
• Locate the rear of the spa light.
• To remove the LED, turn outside housing counter clockwise ¼ turn, and pull out and remove
LED from socket.
• Replace the LED by reversing the above steps.