FAQ

• What is a “waterfall feature”?
This is a top view image of the waterfall feature.
• How do I set up my new spa?
Set up is easy. Simply set the spa in the desired place, fill it up with a garden hose, and
plug it in to any standard 115volt outlet.
If you ordered a 230v spa, you will need to contact a licensed electrician to supply and
install a GFCI, conduit and wires.
• Do I need to clean the spa?
We recommend changing your spa water every 60 to 90 days depending on usage.
When your spa is empty, simply take a wet rag and wipe the inside if desired. Do not
use solvents or abrasive cleaners. Typically a mild detergent and water will resolve
cleaning issues.
• How often do I need to drain and refill the hot spa?
Depending on usage, we recommend draining and refilling the spa every 60 to 90 days.
You can extend the life of the water by showering prior to using the spa and by not
washing the bathing suits you wear in the hot spa. Laundry detergent is easily
transferred from bathing suits into the spa water.
• What type of heater comes with the spa?
Plug in, 110v hot spas use a thermal friction jet pump, which generates heat. A separate
heater is not necessary.
230v hot spas use a 4kw stainless steel heater.