FAQ

• How do I fill and drain the spa?
You can fill the spa with a normal garden hose. The spa is equipped with a bottom
drain.
• What is the pump horsepower?
Plug in spas have a The pump is 1.0 Horse Power pump, and 230v spas have a 3.0 HP
pump.
• Can the spa be used all winter, outdoors and in freezing temperatures?
Yes! Winter is one of the best times to use a spa. The full foam insulation and locking
thermal cover will ensure maximum heat retention so you can enjoy your spa all year
long.
• Can this be installed on a second floor balcony/patio? Or is it too heavy?
Due to our rotational molding manufacturing process, Lifesmart Spas are much lighter
than traditional acrylic hot tubs. Our spas weigh between 244-478 lbs without water
and 2,035 – 3,987 lbs with water. If you are setting it up on an elevated wood deck or
other structure, it is advisable to consult with a structural engineer or contractor to
ensure the structure will support the weight.
• Do you remove existing spas?
No.
• Can the spa be set up in doors?
Yes. It’s equipped with an exterior bottom drain, so when you’re ready to change the
water, simply hook up a hose to the bottom drain, and drain the water into a nearby
drain.
• Where do I find an authorized service and repair center?
Please call us at [phone] to find your local service center.
• How long is the cord?
10 feet.
• How long does it stay at the set temperature?
Continuously. The spa’s full foam insulation and thermal locking cover, coupled with the
programmable thermostat allow the spa to stay at the desired temperature.