Instructions / Assembly

11
ELECTRICAL WIRING DIAGRAM FOR 230V USE
It is recommended that a licensed electrician install the power to your spa in accordance with the
National Electric Code and/or any local electrical codes in effect at the time of installation.
Power supply installation must include a properly rated GFCI circuit breaker. The circuit must be
dedicated and should not be shared with any other appliances. The power supply must be hard
wired into the power pack.
White Neutral Wire that is connected
to Spa Neutral goes HERE.
230V Wiring Instructions:
4 wires/Minimum 40 amp GFCI
Breaker #8 AWG 75°C Copper Wire
Minimum (less than 100’ length)
Copper wire only.
Special Note:
If the GFCI Breaker trips immediately
after attempting to turn on, please
check the White Neutral Wire that is
connected to the Spa.
From the House
Breaker Box
To the Spa
ELECTRICAL REQUIREMENTS
Red
White
Black
Green