DIGITAL TOWER FAN lifesmart® is a registered trademark of Supply Chain Sources LLC., All Rights Reserved. Customer number: BL-FS1-D ATTACH YOUR RECEIPT HERE Purchase Date ____________Serial Number (located on back of unit) __________________ Questions, problems, missing parts? Contact technical support department at 657-341-0362, 9:00 a.m. - 5 p.m., PST, Monday - Friday or visit us online at www.lifesmartcomfort.
TABLE OF CONTENTS Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation. . . . . . . . . . . . . . . . . . . . . . .
PACKAGE CONTENTS A C ON/OFF D B Wind Speed Swing Timer E PART DESCRIPTION QUANTITY A Cooling Fan 1 B Remote Control 1 C Control Panel (preassembled to Fan (A)) 1 D Air Outlet Vent (preassembled to Fan (A)) 1 E Tower Fan Base (assembly required) 1 3
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product. IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • Make certain the power source conforms to the electrical requirements of the Fan.
SAFETY INFORMATION • • • • • • • • NEVER operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner. NEVER insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire, or damage the Fan. To reduce the risk of fire, DO NOT block or tamper with the Fan in any manner while it is in operation.
PREPARATION NOTE: DUE TO THE HIGH VELOCITY OF AIR GENERATED BY THIS FAN, HEARING THE SOUND OF THE AIR IS NORMAL. FOR QUIETER OPERATION, USE LOW SPEED. 1. Carefully remove the fan from the plastic bag and carton. 2. Using the included screws align the two base pieces and secure using a phillips screw driver as shown in the illustration below. 1 2 3 3. Place the Fan on a firm level surface. 4. Remove plastic strip from the remote control to enable battery contact. 5.
REMOTE CONTROL 1 ON/OFF 2 4 Wind Speed 5 3 Swing PART Timer NAME DESCRIPTION 1 Power Button Powers the Fan ON or OFF 2 Fan Wind Mode Button Cycles between the 3 available fan modes, Sleep, Natural, and Normal fan mode settings 3 Swing Button Engages or Disengages the unit’s oscillation feature 4 Fan Speed Button Cycles between the variable fan speed settings 5 Timer Button Engaes the timer function and sets the length of operation between 1 or 12 hours.
CONTROL PANEL 1 2 3 4 5 Sleep Natural 12 6 Swing 11 Swing ON/OFF Wind 7 Speed Timer 10 PART 9 NAME 8 DESCRIPTION 1 Natural Fan Mode Icon LED indicator light when NATURAL fan mode is engaged 2 Sleep Fan Mode Icon LED indicator light when Slee[ fan mode is engaged 3 Timer Indicator Icon LED Indicator light when OFF timer is engaged 4 Low Fan Speed Icon LED Indicator lights when low fan mode speed is engaged.
OPERATING INSTRUCTIONS 1 1. Turn the Fan on or off by pressing the Power button on the control panel (C) or by pressing the Power button on the remote control (B). 2. The digital display will illuminate and show the ambient room temperature. Note this is the temperature readout next to the fan and not the entire room. C B ON/OFF ON/OFF 2 3. Select a fan speed setting by pressing the FAN button repeatedly to select a fan speed setting on either the control panel (C) or the remote control (B).
OPERATING INSTRUCTIONS 5 6. Turn the oscillation mode on or off by pressing the oscillation button on the control panel (C) or by short pressing the oscillation button on the remote control (B). C B SWING SWING 6 7. To replace the batteries, remove the battery cover (1) from the remote (B) by applying pressure to the battery cover (1) and sliding it out from the remote (B). Insert one CR2025 battery (2) and close the remote by placing the battery cover (1) back inside the remote (B).
ONE-YEAR LIMITED WARRANTY The manufacturer warrants this product against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase. Your sales receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place for future reference. This warranty is subject to personal use only, commercial or rental applications will not be covered.
REPLACEMENT PARTS LIST For replacement parts, call our technical support department at 657-341-0362, 9:00 a.m. - 5 p.m., PST, Monday - Friday PLEASE REMEMBER TO REGISTER YOUR WARRANTY: web: www.lifesmartcomfort.com email: cs@scsources.com Printed in China lifesmart is a registered trademark of Supply Chain Sources., All Rights Reserved.
