Use and Care Manual
e Please ensure there is a chair and accessories inside the packing box
~----------------------------------------------------------~
,
~
' chair
1
Accessories
[
:~
I
Manual book
Warranty card
1
Certificate
of
approval
I
1 1 Accessories bag
for
installation
chair Controller Manual book Power cord 1
' ,
'-----------------------------------------------------------~
Moving method
When moving,please tum off main power switch,then unplug the power plug.
Using caster to move
Please put the back
of
the chair to the bottom and then hit the rear wheel, then move
• he chair cannot be moved
if
the passage is less than 75cm in width.
e Contact the dealer
in
case you cannot move the chair normally.
•
Due to the heavy weight
of
the chair, make sure that it will not damage
your waist
or
other parts
of
your body during moving.
Controller is connected to the chair, make sure it does not fall during
11\.
Attention •
~
moving.
• Do not move the chair with person loaded.
e Please move the chair after unplugging.
--->Otherwise it may cause damages to the power plug,causing fire
disaster
or
electric.
How to switch on the power
<D
Insert power cord into outlet ® Turn on main power switch on the back
of
the chair
* If the rollers get stuck, turn
of
the switch and press the ON/OFF button,the roller will be
back to its
initial position.
~Warning
• Do not connect power cord to an external transformer
~ttention
'
• Ensure the main power switch is off before plugging the power socket
or
controller.
e Please insert power plug and controller plug fully
•
Read this manual book carefully before using,set the chair according to
the requires,ensure
normal operation
Connecting the power
Check the power cord,power plug,socket on the chair, main power switch,
controller are unbroken for the first time use
or
use after long time storage.
Then
plug power cord.
Power cord
Plug Controller Socket