Instructions / Assembly

Before moving the chair, turn off the main power switch located on the back of the unit
and unplug from the wall.
Using casters to move
Gently tilt the chair backwards until it sits on the rear wheels. This will allow you to move the
chair forwards or backwards. Two people may be required to move the chair successfully.
• Make sure the doorway can accommodate a width of 29.50” inches.
• Due to the heavy weight of the massage chair, caution while moving
as to not injure yourself. A second person may be necessary.
• Disconnect the remote control while moving to prevent breakage.
• Do not move the chair while in use or a person is seated in the chair.
• Only move the chair after it is unplugged from the wall. Risk of electric
shock, fire or damage may occur.
• Plug the unit directly into a 3-prong outlet.
• DO NOT use an external power source or transformer.
• Ensure the main power switch is off before plugging in the power cord
or remote control.
• Make sure to insert the power cord and remote control plug firmly and securely.
• Read this manual carefully before operating, using, or installing the massage chair.