INFRARED QUARTZ HEATER MODEL #LS1002THD14 / S-2PC-1000B lifepro® is a registered trademark of lifecorp products®, All Rights Reserved. Temp./Time RCIN Power Power Timer Temp.Up Temp.Down Timer ATTACH YOUR RECEIPT HERE Purchase Date ____________Serial Number (located on back of unit) __________________ Questions, problems, missing parts? Contact technical support department at 1-866-484-2066, 8:00 a.m. - 5 p.m., CST, Monday - Friday or www.@lifecorpproducts.
TABLE OF CONTENTS Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Frequently Asked Questions . . . . . . . . . . . . . . . . . . . .
PACKAGE CONTENTS A D Temp./Time C Power Power E RCIN Timer Temp.Up Temp.Down Timer F Front View Rear View ºC/ºF ºC/ºF Power Temp.Up B Temp.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product. IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • This heater must be plugged into a 120 V, 15 amp (or more) circuit of its own.
SAFETY INFORMATION Child Lock Safety Feature Press the Temp Up and Temp Down buttons located on the control panel together for 3 seconds. Locking is confirmed when a buzzer rings. When locked, the control panel and remote control will not function. And temp up To unlock the control panel and remote, repeat this procedure. Unlocking is confirmed when a buzzer rings and the lock indication disappears. temp down Tip-Over Safety Feature This heater is equipped with a tip-over safety feature.
FREQUENTLY ASKED QUESTIONS Please review these frequently asked questions on the next few pages prior to using your heater. Q. My heater emits a strange odor when I first open the box and when I turn the heater on for the first time. Why is this happening? A. This is normal. This heater is treated with a special heat safe/resistant coating. This odor will sometimes be present when the box is opened.
FREQUENTLY ASKED QUESTIONS Q. The temperature on my heater does not match the temperature display on my wall, or external thermostat. Why? A. This is completely normal. The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external thermostat). This is because the temperature sensor on the heater reads the temperature directly around the heater.
PREPARATION Place the heater on a firm, level surface and plug into a grounded 120 V, 60 Hz power outlet and turn on the power switch on the rear of the unit. Only operate heater in upright position. Insert one CR2025 battery into the remote control before using (battery inluded.) Please note that infrared heaters do not heat like a traditional space heater. You should not expect infrared heaters to blow hot air like a traditional space heater. Infrared heaters heat objects not air.
CONTROL PANEL Temp./Time 10 RCIN ºC 9 1 ºF 8 Power Timer 7 Power Temp.Up 6 5 Temp.
REMOTE CONTROL 1 ºC/ºF 5 ºC/ºF Power 2 Temp.Up 3 Temp.
OPERATING INSTRUCTIONS 1. Turn the heater on or off by pressing the Power button on the control panel (C) or by pressing the Power button on the remote control (B). 1 Once the power is off, heating elements will stop working first. The fan will continue working for up to 3 minutes to dispense residual heat inside the heater. This is a normal function. 2. Set the thermostat by pressing the arrows on the control panel (C) or the remote control (B).
OPERATING INSTRUCTIONS 3. To set the timer power off, start the unit and press the Timer button on the control panel (C) or remote control (B). 3 TIMER The digital display on the control panel (C) changes from the set temperature readout to a time value for the timer. Press the Timer button repeatedly to change the number value between a range of 0 to 12 hours (in 1-hour intervals). The Timer light turns on when the timer is set. 4.
CARE AND MAINTENANCE WARNING: Before performing any maintenance task, turn off the power switch in the rear of the unit, unplug the unit, and allow it to cool completely. 1. To keep the heater clean, clean the outer shell with a soft, damp cloth. Use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 2. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater.
ONE-YEAR LIMITED WARRANTY The manufacturer warrants this heater against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase. Your sales receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place for future reference. This product is made with the highest quality materials and is warranted to be free from defects in materials and workmanship at the time of purchase.
REPLACEMENT PARTS LIST For replacement parts, call our technical support department at 1-866-484-2066, 8 a.m. - 5 p.m., CST, Monday - Friday or www.lifecorpproducts.com PART A B DESCRIPTION Control panel Fan PART # 208305 208200 C Power board 208307 D Tip-over switch 208246 E Auto Thermostat 208284 F Infrared tube 208197 F Infrared tube 208199 G Thermostat Wire 208280 H Remote control 208309 A B C D E F G H Power Temp.Up Temp.
