Use and Care Manual

OPERATING INSTRUCTIONS

4. To power on or adjust the flame effect brightness,

press the Dimmer button on the control panel (C) or

remote control (B)

Note: The flame effect function can be set when the

heater is in the on or off mode.

The unit will cycle between, high, medium, low and

off brightness levels

Dimmer

5. To replace the batteries, remove the battery cover

(1) from the remote (B) by applying pressure to the

battery cover (1) and sliding it away from the remote

(B). Insert two AAA batteries (not included) (2) and

close the remote by placing the battery cover (1)

back on the remote (B).

1 2