Use and Care Manual

Rev. 1/15 6
CUSTOMER RESPONSIBILITIES
Read and follow the maintenance schedule and the maintenance procedures listed in this section.
WARNING: ALWAYS UNPLUG THE POWER CORD BEFORE MOVING OR SERVICING THE
PRODUCT. DO NOT IMMERSE THE PRODUCT IN WATER!
REPLACING FILTERS
WARNING: ANY SERVICING OF THIS UNIT, EXCEPT FOR GENERAL MAINTENANCE
DESCRIBED IN THIS SECTION, SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE
REPRESENTATIVE.
CAUTION: The filters have been designed to provide optimal system performance by catching
any debris that may enter the supply lines throughout use. Semi annual replacement of both the air
and water filters ensures the life of your system.
1. Remove the filter access doors to locate the air and water filters (fig 9).
2. The filters are connected to the system via “Push-In” connectors for ease of service.
3. Push the connector ring and pull out the air filter hose from the push-in connector, and the water filter
hose from the push-in connector (fig 10).
4. Dispose of old filter. Always dispose of waste according to local law.
5. Remove new filter from package and insert into the filter housing.
6. Push the hose into the push-in connectors to connect the filters (fig.10). Be sure to fully insert the hose
into the connector.
7. Reconnect power and test system for water leaks.
8. Reinstall filter access door (fig.9).
Maintenance