Operating Guide

WARNING

any sharp edges. However, you should handle all

components with care to avoid accidental injury.

Please read all instructions thoroughly before proceeding.

Find a large, clean area in which to assemble your

17” Griddle. Please refer to the assembly diagram as ne-

cessary.

NOTICE: Make sure all the plastic protection and

packaging is removed before assembling

ASSEMBLY AND LIGHTING INSTRUCTIONS

PARTS LIST

• (4) Adjustable Height Feet

• Oil Drip Tray

• Main Body

• Regulator

STEP 1

Remove the four adjustable height feet and regulator from

the packaging and place on a flat soft surface upside down.

Attach the four adjustable height legs to the bottom of the grill.

Flip the griddle over and align the the griddle pan to the body.

STEP 2

Screw in the LP bottle into the gas regulator, turning the

tank clockwise.

The LP bottle should look like the picture below when

properly connected to the regulator.



 







 











 





 





