OIL FILLED RADIATOR Safety & Operating Instructions Model # YAA02E-5 YAA02E-7 YAA02E -9 YAA02E -11 YAA02E -13 YL-A02LCD WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, READ ALL THE INSTRUCTIONS BEFORE USING THIS HEATER, AND FOLLOW THESE INSTRUCTIONS! BE SURE TO SAVE THIS MANUAL FOR FUTURE REFERENCE --SAVE THESE INSTRUCTIONS-- 1
CONTENTS 1. Important Instructions ............................ 3 2. Parts Identification .................................. 5 Mode and Technical data………………… 5 Safety Control……………………………. 5 3. Assemble .................................................. 6 4. Operate...................................................... 6 Set temperature………………………………… Set timer(auto- off)………………………… Set timer(auto- on)………………………… Timer function examples………………….. Fahrenheit/Celsius function………………… 5.
1. IMPORTANT INSTRUCTIONS Basic safety precautions should always be followed when using electrical products, especially when children are present. WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, FIRE OR INJURY TO PERSON, ALWAYS MAKE SURE THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT. 1. Read all instructions before using this heater. 2. Connect the appliance to single-phase AC power supply of the voltage specified on the rating label. 3.
20. Do not use this product to dry or heat clothing, shoes, pipes, or any other item. 21. Do not place or expose this product to water or other liquids. 22. Do not move the product when it is heated. Allow the product to thoroughly cool before handling it. 23. Do not run cord under carpeting and do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic area and where it will not be tripped over. 24.
2. Parts Identification Castor Wheel Assembly 5 3 Description Castor Wheels Drawing Quantity 2 2 Wing Nut 2 Arc-shaped Bracket 2 4 6 8 7 1 1. Castor Wheels 2. Button 3. LCD Display Screen 4. Power Switch 5. Control Panel 6. Front Cover 7. Radiator Fins 8. Cord Storage Mode and Technical data Model No.
3. Assemble 1. Unpack the Castor Wheels and Arc-shaped Brackets from the product packaging. 2. Turn the radiator upside-down on a scratch-free and stable surface to prevent damage to the paint finish or your floor surfacing. 3. Fit the two (2) Castor Wheels onto the radiator by placing the Arc-shaped Brackets between the outermost fins on each side of the radiator. 4. Securely fasten the two (2) Castor Wheels onto the radiator by screwing two (2) Wing Nuts onto each Foot. 5.
Note: if operated at the Low setting, the heater will not provide as much heat output as in the High setting , however , the Low setting will not require a much electrical current to operate .To avoid overloading a circuit , do not plug the heater into a circuit that already has other appliances working. SET TEMPERATURE MODE F/C + POWER 1. Press the Mode button until the temperature icon blinks . 2. Use the + and - button to set the desired temperature,from 13 to30℃. 3.
2. Use the + and - buttons to set the heater start time between 1 and 10 hours. This function will activate once the timer icon stops blinking. 3. The heater will automatically turn on when time expires. NOTE: If the desired temperature was set prior to setting the timer function, the heater will cycle on and off as per the selected desired temperature setting once the heater begins to operate. NOTE: When using the Auto-On function the heater will turn on after the set time has elapsed.
Conformity with Directives This product is CE marked to denote conformity with Directives 73/23/EEC(Low Voltage) and 89/336/EEC (Electromagnetic Compatibility), as amended. Environmental Protection Disposal This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
--SAVE THESE INSTRUCTIONS-- 10
