INFRARED QUARTZ FIREPLACE LIFE SMART® is a registered trademark of Supply Chain Sources LLC., All Rights Reserved. Customer number: ZCFP1032US ZCFP1033US-BLK ZCFP1033US-WHT ATTACH YOUR RECEIPT HERE Purchase Date ____________Serial Number (located on back of unit) __________________ Questions, problems, missing parts? Contact technical support department at 657-341-0362, 9:00 a.m. - 5 p.m., PDT, Monday - Friday or contact us via email at cs@scsources.
TABLE OF CONTENTS Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Frequently Asked Questions . . . . . . . . . . . . . . . . .
PACKAGE CONTENTS A C B E F PART DESCRIPTION QUANTITY A Infrared Heater 1 B Remote Control 1 C Control Panel (preassembled to Infrared Heater (A)) 1 E Temperature Sensor (preassembled to Infrared Heater (A)) 1 F 3-prong Power Cord (preassembled to Infrared Heater (A)) 1 3
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product. IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • • • • • • • • • • • • • • • • • • • • This heater must be plugged into a 120 V, 15 amp (or more) circuit of its own.
SAFETY INFORMATION Child Lock Safety Feature Press and hold the child lock button located on the control panel for 5 seconds or remote control for 3 seconds. Locking is confirmed when a buzzer rings and the control panel displays “CL”. When locked, the control panel and remote control (if provided) will not function. To unlock the control panel or remote (if provided), repeat this procedure. Unlocking is confirmed when a buzzer rings and the lock indication disappears.
INFORMATIONS SUR LA SÉCURITÉ Veuillez lire et comprendre ce manuel entier avant d’essayer d’assembler, d’utiliser ou d’installer l’appareil. CONSIGNES DE SÉCURITÉ IMPORTANTES AVERTISSEMENT: RISQUE POTENTIEL D’ÉLECTROCUTION SI LES CONSIGNES DE SÉCURITÉ NE SONT PAS RESPECTÉES.
INFORMATION DE SÉCURITÉ Dispositif de sécurité et de verrouillage pour enfant Appuyez pendant 5 secondes sur le bouton de verrouillage pour enfant situé sur le tableau de commande. Le verrouillage est confirmé quand un vibreur se déclenche et que le tableau de commande affiche « CL ». Quand le radiateur est verrouillé, le tableau de commande et la télécommande ne fonctionnent pas Pour déverrouiller le tableau de commande et la télécommande, répétez cette procédure.
FREQUENTLY ASKED QUESTIONS Please review these frequently asked questions on the next few pages prior to using your heater. Q. My heater emits a strange odor when I first open the box and when I turn the heater on for the first time. Why is this happening? A. This is normal. This heater is treated with a special heat safe/resistant coating. This odor will sometimes be present when the box is opened.
FREQUENTLY ASKED QUESTIONS Q. The temperature on my heater does not match the temperature display on my wall, or external thermostat. Why? A. This is completely normal. The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external thermostat). This is because the temperature sensor on the heater reads the temperature directly around the heater.
PREPARATION Place the heater on a firm, level surface and plug into a grounded 120 V, 60 Hz power outlet. Only operate heater in upright position. Insert two AAA batteries into the remote control before using (batteries not included). *(Not all products will include a remote control.) Please note that infrared heaters do not heat like a traditional space heater. You should not expect infrared heaters to blow hot air like a traditional space heater. Infrared heaters heat objects not air.
CONTROL PANEL 1 2 3 4 14 13 12 11 PART 10 9 8 NAME 7 6 5 DESCRIPTION 1 Digital Display Readout of the set room temperature or timer value 2 Celsius Indicator Light Indicates that the temperature is being displayed in Celsius 3 Fahrenheit Indicator Light Indicates that the temperature is being displayed in Fahrenheit 4 Power Indicator Light Indicates when the unit is receiving power from the wall outlet 5 Power Switch Button Powers the heater ON or OFF 6 Flame Effect Butt
REMOTE CONTROL 1 6 2 3 4 5 PART NAME DESCRIPTION 1 Temp Up Button Increases the set temperature value 2 Mode Button Toggles between the three heat modes available 3 Temp Down Button Decreases the set temperature value 4 Power Button Powers the heater on or off 5 Flame/Lock Button Short press: Toggles the Flame Effect from High/Med/Low/Off. / Long press: for 3 seconds to activate lock function.
OPERATING INSTRUCTIONS 1. Turn the heater on or off by pressing the Power button on the control panel (C) or by pressing the ON/OFF button on the remote control (B). 1 Once the power is off, heating elements will stop working first. The fan will continue working for up to 90 seconds to dispense residual heat inside the heater. This is a normal function. 2.
OPERATING INSTRUCTIONS 4. To set the timer to power off the heater, start the unit and press the Timer button on the control panel (C) or remote control (B). 4 Note: The timer-power-off function can only be set when the heater is in power-on mode. C B C B C B The digital display on the control panel (C) changes from the set temperature readout to a time value for the timer. Press the Timer button repeatedly to change the number value between a range of 0 to 12 hours (in 1-hour intervals). 5.
CARE AND MAINTENANCE WARNING: Before performing any maintenance task, unplug the unit, and allow it to cool completely. 1. To keep the heater clean, clean the outer shell with a soft, damp cloth. Use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 2. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 3.
ONE-YEAR LIMITED WARRANTY The manufacturer warrants this heater against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase. Your sales receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place for future reference. This warranty is subject to personal use only, commercial or rental applications will not be covered.
REPLACEMENT PARTS LIST For replacement parts, call our technical support department at 657-341-0362, 9 a.m. - 5 p.m.
PLEASE REMEMBER TO REGISTER YOUR WARRANTY: web: www.lifesmartcomfort.com email: cs@scsources.com Printed in China LIFE SMART® is a registered trademark of Supply Chain Sources LLC., All Rights Reserved.
