Fitness Rowing Machine Owner's Manual

STEP 3:

ATTACH SEAT RAIL TO MAIN FRAME

STEP 4:

PEDAL ASSEMBLY

a. Line the seat rail directly behind

the main frame and attach the

wire connectors coming from

the seat rail and main frame.

a. Remove the an Allen screw and washer from one end of the pedal axle.

b. Push the end if the pedal axle through the top hole in the frame and

the only hole in the rail, with a spacer on one side. Add the spacer

and the pedal to the other side.

c. Using an Allen Wrench on each end of the axle, tighten the Allen

Screw with the washer that was removed earlier.

d. Insert locking pin in the lower hole of the main frame while lifting the

sliding rail up slightly near the pedal axle.

NOTE: Locking Pin will go through the lower hole

in the main frame and under the slide frame.