Treadmill Owner’s Manual DT3 Treadmill Base Owner’s Manual TR1200B, TR5000B
Table of Contents Welcome Getting Started Welcome Warranty Registration Safety 4 Treadmill Base Specifications Unique Features Maintenance Assembly Instructions 11 Treadmill Desk Operations Specifications Console Overview Starting the Treadmill Desk Innovative Features Troubleshooting Personal Settings Display Detail 21 3
Welcome Congratulations on choosing the LifeSpan Workplace™ line of products. These products give you the opportunity to remain productive while taking care of yourself as you integrate movement with normally sedentary tasks. The average American now spends eleven hours, five days a week, sitting, and burns one-hundred fewer calories each day than they did a few decades ago. Sitting for long periods slows your metabolism, reduces calories burned, and increases your risk for heart disease and diabetes.
Warranty Your LifeSpan treadmill desk comes with the following limited warranty valid in North America and the United Kingdom. If you are outside of these areas contact your local distributor for warranty information or visit www.LifeSpanFitness.com.
Registration Should you need to process a warranty claim make sure you retain your purchase receipt to verify the date of purchase and register your LifeSpan product online. To complete the registration go to www.LifeSpanFitness.com and select “Product Registration”. Proper Grounding LifeSpan equipment must be grounded. Improper connection of the equipment’s grounding conductor can result in the risk of electric shock.
Safety First When using active workstations, basic precautions should always be followed, including: • Never drop or insert any object into any opening. If an object falls into an opening, turn the power off and unplug the power cord from the outlet. Remove the object or call customer service at 877.654.3837 option 4. • Never operate this treadmill if it has been damaged or partially submersed in water.
Safety First Safety Tips While in Use • Always consult a physician before beginning an exercise program. • If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing. Do not wear clothing or jewelry that might catch on any part of the treadmill. • Wear shoes with high traction rubber soles. Do not wear shoes with heels, leather soles, cleats or spikes. • Do not walk or run backwards on the treadmill, always face forward.
Treadmill Base TR1200B, TR5000B 11
About Your Treadmill Base Specifications TR1200B Speed Range 0.4 - 4.0 mph (0.6 - 6.4 kph) Walking Belt Size 20" x 50" (51 cm x 127 cm) Roller Size Tapered Front 2.4” (6 cm), Rear 2.0” (5 cm) Deck 3/4" (1.9 cm) Phenolic Deck Deck Suspension 6 Independent Compression Shocks Drive Motor 2.25 HP Continuous Duty DC Max User Weight 350 lbs. (159 kg) TR5000B Speed Range 0.4 - 4.0 mph (0.6 - 6.4 kph) Walking Belt Size 20" x 50" (51 cm x 127 cm) Roller Size Tapered Front 2.4” (6 cm), Rear 2.
About Your Treadmill Base Unique Features As a leader in the active workstations, LifeSpan has developed a number of unique features in our treadmills making them more engaging, safer and easier to use. Learn more about how to use these features in the Saving Your Results and Personal Settings sections of this Owner’s Manual. Intelli-Guard™ Walk confidently knowing your safety is assured with Intelli-Guard™.
Maintenance and Tips Daily Cleaning It is recommended to wipe the treadmill down after each use to keep the treadmill clean and dry. A mild detergent may be used at times to help remove all dirt and salt from the belt, painted parts and the display. Monthly Cleaning This cleaning includes removing the motor cover and cleaning around the motor and electronics.
Maintenance and Tips Belt Lubrication Use only 100% silicone and avoid using aerosol silicone sprays which include additives and petroleum distillates. One ounce of silicone should be used for each application. LifeSpan offers 100% silicone lubricant that can be ordered at www.LifeSpanFitness.com. The walking belt comes pre-lubricated from the factory. The TR1200B should be lubricated every 50 hours of use. The TR5000B comes with a maintenance free belt and doesn’t require lubrication.
Maintenance and Tips Belt Tensioning If the belt begins to slip and needs to be tensioned, tension bolts are accessible from the back of the treadmill. Before tensioning the belt, start the treadmill and set the speed to 3 mph (5 kph). A. Using a 6 mm Allen wrench, included in your hardware bag, turn the right and left tension bolts 1/2 turn clockwise. B. Test to see if the slipping is eliminated. If the belt slips repeat step A and test again.
Maintenance and Tips Belt Alignment (continued) To move belt to the Right Figure 1 To move belt to the Left Figure 2 Visit www.LifeSpanFitness.com for a full video demonstration on the aligning your treadmill belt. Moving the Treadmill Base 1. Make sure the ON/OFF switch is turned OFF and the power cord is unplugged from the wall. 2. Make sure nothing is on or near your treadmill which might spill, be knocked off, or prevent the treadmill from moving. 3.
Assembly Instructions After assembling the treadmill, roll it to the desired location. Plug the console connector into the connector coming from the front of the treadmill. Be sure to screw the two connectors together with the attached thumb screws. console port on/off switch power receptacle NOTE: Do not plug the power cord into the equipment until the console is connected. Safety Key When using the DT-3 with a treadmill use Safety Key (F).
Treadmill Desk Console Overview & Specifications 5 2 4 3 1 Console Power Buttons 1. Start/On: If the console is in deep sleep mode, press and hold this button for three seconds to turn the console on. Once the console is turned on press to start the treadmill. 2. Stop/Reset: Pauses the treadmill. If pressed for one second, resets the console (all data readouts are reset to zero). After resetting console will go into "sleep mode" after 10 minutes. 3. Preset: Defaults to 1.5 mph / 2.
Treadmill Desk Console Overview Starting the Treadmill Desk 1. Turn the power switch on. It is located on the front right corner of the treadmill. 2. The current user weight will be flashing on the display panel. Adjust your weight to obtain accurate calorie calculations. 3. Make sure the safety key is engaged in the console. NOTE: The display will show "–––" if the Safety Key is not engaged. 4. Press the Start button to start the treadmill belt. The console will start counting up from 0:00. 5.
Treadmill Desk Console Overview Intelli-Guard™ - This unique safety feature is engaged when the treadmill belt speed reaches 1.0 MPH (1.6 KPH) or faster and automatically pauses the belt 20 seconds after you stop walking, ensuring that no one else steps on the treadmill desk without noticing that its already running. When Intelli-Guard senses that the treadmill is no longer being used, after 20 seconds the audible beep will first notify you that the treadmill belt is going to pause.
Treadmill Desk Troubleshooting The LifeSpan Treadmill Desk is designed and manufactured to be reliable and easy to use. However, if you have a problem, these troubleshooting steps may help you find the cause. Problem: The console is erratic or not lighting up. Solution: Check to make sure the treadmill is properly plugged in. Turn the power switch off and make sure the safety key is in place. Make sure the console wire connector is properly plugged in.
Treadmill Desk Personal Settings Press and hold "STOP" and " " for three seconds to enter Settings Mode. Press the or arrows to move through the various settings. Press ENTER to choose a setting to change. Press the or arrows to move through the various choices for that setting. Press ENTER to select a choice. This takes you back to settings mode, where you can move through the other settings. Remove the Safety Key to exit Personal Settings. Engage the Safety Key to resume operations.
Display Detail Setting Setting Displayed Choice 1 (Default) Choice 2 INTELLI-GUARD F012 ON OFF UNIT OF MEASURE F014 EN SI BEEP F015 ON OFF SPEED LIMIT F018 2.0 mph / 3.2 kph 4.0 mph / 6.4 kph SPEED RESET F019 PRESET PRESET SPEED 0 1 Resumes at 0.4 Resumes at last set speed F020 ON OFF F021 1.5 mph / 2.4 kph +/- 0.
DT3/TR1200B/TR5000B Desk Console /Treadmill LifeSpan Fitness P.O. Box 981316 Park City, Utah 84098-1316 Phone: 877.654.3837 www.LifeSpanFitness.com Version 1.
