Fitness Treadmill User Manual

treadmill operations

Before starting your treadmill the following actions will need to be properly completed:

Be certain that your treadmill is sitting level and stable. It is also recommended that you locate

your treadmill in a pleasant area that gives you something to look at while working out, such

as a window or television. Maintaining an exercise program with a treadmill located in a

poorly lit basement room is more difficult than when your treadmill is located in an active

and pleasant location.

2. Make sure that your treadmill is plugged into a properly grounded outlet as described in the

grounding section of this document.

3. Turn the On/Off switch, which is located in the front of your treadmill, to the On position.

4. I

nsert the magnetic safety key into the round area centered at the bottom of your display. If

the safety key is not inserted properly you will see lines across the middle of each LED display.

QuickStart

1. Attach the "Safety Key" to your clothing. This key will immediately shut off your treadmill if

removed and is strongly recommended for your safety.

2. QuickStart - The quickest and easiest way to start your treadmill is to push the Quick Start

button. This will cause the display to count down for 3 seconds and then begin in the

“Manual Program” at 0.6 mph.

3. Speed Adjustment - can be increased and decreased in 3 different ways:

Display Console - "/\" "\/" Each time you press the "/\" button on the display console the

speed will increase by 0.1 mile per hour.

Handlebar Speed Control - The heart rate sensor on the right side of the handlebars

includes a speed control switch. Pushing the switch on the right side increases the speed

by 0.1 mile and pushing the button on the right side decreases the speed. It needs to say

right side for increasing and left side for decreasing.

Quick Buttons - The display console includes buttons that immediately set the speed to

3, 4, 5, and 6 mile per hour without having to scroll through the speeds.

4. Incline - Like the speed settings, incline can be adjusted 3 different ways:

Display Console - "/\" "\/" Each time you depress the "/\" or "\/" button on the display

console the incline will increase or decrease by 1 level.

Handlebar Incline Control - The heart rate sensor on the left side of the handlebars

includes an incline control switch. Pushing the switch on the left side increases the

incline by 1 level and pushing the button on the right side decreases the incline by 1 level.

Quick Buttons - The display console includes buttons that immediately set the incline to

4, 6, 8, and 10 level without having to scroll through the incline levels.

5. Display Readouts - Besides "Speed" and "Incline" the center LED window will display Time,

Distance, Calories, Heart Rate and Laps. By pressing the MODE button, you can select the

function that you want displayed on the center LED window, or you can go to the Scan mode

to scan through all functions. In the "Quick Start" mode, time will start to count up from 0:00.