Operation Manual

17
At LifeSpan we strive to make our equipment easy to assemble and start
using. Parts that can be pre-assembled are always assembled and tested on
the product line.
Prior to starting the assembly process, take all the parts out of the box,
remove plastic bags and lay everything out on the oor to become familiar
with the components.
Since your desk is a heavy piece of equipment, it is recommended that you
use two people during assembly and follow these assembly instructions to
reduce any problems that may occur.
Table corresponds to the diagram on the left
DT7 Desk: Assembly Instructions
Hardware Included
Item# Part Description Item# Part Description
1 Lift Frame 8 M8 Lock Nut **
2 Desktop 9 M8x15L Bolt **
3 Left Base Foot 10 Accessory Tray
4 Right Base Foot 11 M10 Washer **
5 M8 Washer ** 12 LifeSpan Placard
6 M10 Acorn Nut ** 13 U-Shape Frame
7 M8x45L Bolt ** 14 Console
**Pre-installed
A Desk Position Bumpers
B Extension Tube
C Desktop Mounting Bracket
Hardware Bag Contents
Item # Qty. Part Description
15 6 M6x40L Screw
16 8 #8x5/8L Screw
16a
2 #8x1/2L Screw
17 1 Wire Harness Cover
18 1 Wrench - 17mm
19 1 4mm Allen Wrench 20 1
5mm Allen
Wrench w/Phillips
Screwdriver
5mm Allen
Wrench w/
Phillips
Wrench Wire Harness
Cover
M6x40L
Screw
4mm Allen
Wrench
#8x5/8L
Screw
#8x1/2L
Screw