Installation Guide

ManualsBrandsLifestyle Solutions ManualsBedsSOH-CKB-CP-SET

Box # 1

Box # 2

Slats

14 pcs. Slats

2 pcs. Bed Side Rails

1 pc. Slat Support

Parts And Fittings Packing Detail

2 pcs. - Leg Frame

4 pcs. Support Leg

SOHO BED

Bed Assembly Instructions

Page 1 of 2

A complete assembled view of

a Conventional Bed

32mm Screw - 28 pcs.

(Wrapped in separate Plastic Bag)

Slat Hardware

4mm Allen Key 1 pc.

Bolts M6 x 70mm - 4 pcs.

Bolts M6 x 40mm - 2 pcs.

Washer - 8 pcs.

Hardware Pack In Box #1

5mm Allen Key 1 pc.

Bolt

M8 x 20mm - 8 pcs

The Fusion Of Function And Comfort With Style

Summary of content (5 pages)

PAGE 1
Bed Assembly Instructions Parts And Fittings Packing Detail Box # 2 Box # 1 2 pcs. - Leg Frame 2 pcs. Bed Side Rails 1 pc. Slat Support Hardware Pack In Box #1 Bolt M8 x 20mm - 8 pcs Bolts M6 x 40mm - 2 pcs. Washer - 8 pcs. Bolts M6 x 70mm - 4 pcs. 5mm Allen Key 1 pc. 4mm Allen Key 1 pc. 4 pcs. Support Leg Slats 14 pcs. Slats Slat Hardware 32mm Screw - 28 pcs.
PAGE 2
Bed Assembly Instructions Step 1/Diagram 1 SOHO BED The Fusion Of Function And Comfort With Style Fix both side rails to the Head Board and Foot Board as shown in diagram 1 with the 20mm bolts and washers. Page 2 of 2 Diagram 1 Step 2/Diagram 2 Threaded Hole Further secure the pre-drilled slats to the slats support and support legs with 4nos M6 x 70mm bolt as shown in diagram 2.
PAGE 3
234 Series Casegood Assembly of Metal Drawer Knobs. Step #1 Remove Drawer Knobs as shown To replace Wood knobs with the Metal knobs, remove the Wood knobs and assemble the Metal knobs with the bolts provided along with the Metal knobs. (Do not use Bolts from the Wood knobs on Metal knobs.) Step #2 Assemble knobs on the outside as shown.
PAGE 4
Center Leg 134/ 234/ 334/600 Series 6 Drawer Dresser Removing of Center Leg slide direction The center Leg is added for additional support. It is an optional extra.
PAGE 5
234 Series Casegood Fixing of Metal Door Knobs. Step 1 Remove Door knobs as shown. To replace wood knobs with the metal knobs, remove the wood knobs and assemble/fix the metal knobs with the bolts provided with the metal knobs. (DO NOT USE bolts from the wood knobs on metal knobs) Step 2 Refix knobs on the outside as shown.