LS elite 0-8 mph • 2.0 hp • direct pulse interface • fat burn guide SFA/ S o Model No. 831.297541 Serial No. The serial number can be found in the location shown below. Write the serial number in the space above. Serial Number Decal _kCAUTION!: Read all safety prec,_utions and instructions in this manual before using this equipment. Keep this manual in a safe place for future reference.
I FULL 90 DAY WARRANTY For 90 days from the date of purchase, when proper assembly and maintenance procedures detailed in the Owner's Manual are followed, SEARS will, free of charge, repair or replace and install a replacement part for any defective part, when this treadmill is used in a normal manner. This warranty does not apply when this treadmill is used for commercial or rental purposes. SERVICE IS AVAILABLE SIMPLY BY CONTACTING YOUR NEAREST SEARS SERVICE CENTERJDEPARTMENT IN THE UNITED STATES.
LS ehte 0-8 mph ° 2.0 hp • direct pulse interface ° fat burn guide TABLE OF CONTENTS IMPORTANT SAFETY PRECAUTIONS ......................................................... BEFORE YOU BEGIN ....................................................................... ASSEMBLY .......... ..................................................................... HOW TO USE THE PULSE SENSOR .......................................................... OPERATION AND ADJUSTMENT ...............................................
IMPORTANT SAFETY PRECAUTIONS WARN I NG: To reduce the risk of burns, fire, electric shock or injury to persons, read the fol- lowing important safety precautions and information before operating the treadmill. Position the treadmill on a level surface, with at least 8 feet of clearance behind the treadmill. Do not place the treadmill near water, outdoors or on any surface that blocks an air opening. Do not operate where aerosol products are used or where oxygen is being administered. .
BEFORE YOU BEGIN Thank you for selecting the SEARS LS ELITE 780 treadmill. The LS ELITE 780 treadmill blends advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. For your safety and benefit, read this manual carefully before using the treadmill; if you have additional questions, please call our Customer Sewice Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m.
ASSEMBLY Assembly requires the assistance Of a second person. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: An adjustable wrench _ 1. (not included). Find the Right Updght (15) (see the inset drawing to identify the Right Updght). Insert a 3/8" x 3 1/2" Bolt (27), with one of the four Upright Washers (26), into the higher hole in the bottom of the Right Upright.
5. Plugthe lower end of the Upright Wire Hamess (:t2) into the 20" Wire Hamess (45). The small latch on the Upright Wire Harness should snap onto the 20" Wire Harness (see the upper inset drawing). If the Wire Harnesses do not fit easily, turn them; do not force the Wire Harnesses together. Slide the ends of the two 6" Cable Looms (30) against the ends of the Wire Harnesses (45, 12) (s.ee the lower inset drawing). Be careful not to damage the Wire Harnesses. 12 6.
HOW TO USE THE PULSE SENSOR The treadmill features a unique headband-style pulse sensor. The rubber-armored pulse sensor and lightweight headband are specially designed for greater accuracy, comfort and durability. To get the best performance from the pulse sensor, please read the following instructions. To learn how to use the pulse sensor with the console, see HOW TO USE THE PULSE DISPLAY on page 11.
OPERATION MAINTENANCE-FREE AND ADJUSTMENT WALKING BELT Your treadmill features a maintenance-free walking belt coated with PERFORMANT LUBE TM, a highperformance lubricant. Dudng the first few hours of use, it is normal for a small amount of white powder to appear on the foot rails and the walking platform. The white powder is high-performance lubricant from the walking belt. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform.
o ( C o D [ THE INTERACTIVE CONSOLE The heart of the treadmill is the state-of-the-art interactive console. The console offers electrpnic speed and incline control, six independent displays, and a Fitness Test that measures your relative fitness level. In addition, a unique Fat Calorie Monitor is built into the console. During exercise, your body burns either fat calories or carbohydrate calories, depending on the intensity of your exercise.
bers will be retained in the console's memory, even if the power cord is unplugged. The numbers can be changed, if desired, by pressing the AGE SET or WEIGHT SET buttons. HOW TO MANUALLY CONTROL THE SPEED When the power is turned on, the console will be in the MANUAL CONTROL mode. For your safety, the walking belt will be stationary. The speed range of the walking belt is 0.5 to 8 miles per hour.The speed is controlled with the SPEED buttons.
When the Fat Calorie Monitor is activated, one of wooden _E.sr_ m__u.._; tAT the five indicators _wO O(_O O in the center of the console will light. The two red indicators on the left indicate that your intensity level is too low for burning fat effectively. The two red indicators on the dght indicate that your intensity level is too high for burning fat effectively. When your intensity level is perfect for buming fat, the green indicator in the center will light.
Toviewtotaltimeanddistance,pressthe FITNESS TESTbutton.Theletter"T"in the SPEED display will darken. The total time will be shown in the TIME display, up to 9,999 hours.The total distance will be shown in the DISTANCE display, up to 999 miles (if the total distance exceeds 999 miles, the display will begin again at zero). The total time and distance cannot be reset to zero. To exit the information mode, remove the safety key.
TROUBLE-SHOOTING AND STORAGE Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time. 1. SYMPTOM: THE POWER DOES NOTTURN ON a. Make sure that the power cord is plugged into a properly grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page 9.
b. If the walking belt has shifted to the dght, first remove the safety ke_, and UNPLUG THE POWER CORD. Using the belt tool, turn the rear roller adjustment bolt counterclockwise 1/4 of a turn. Plug in the power cord, insert the safety key and run the treadmill for a few minutes. Repeat until the walking belt is centered. b _BeltTool _ I STORAGE Unplug the power cord when the treadmill is not in use. Remove one bolt, washer and upright spacer from the lower ends of the left and right updghts.
CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. Remember that proper nutrition and adequate rest are essential for successful results. , WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for individuals over the age of 35 or individuals with pre-existing health problems. EXERCISEINTENSITY To maximize the benefiis of exercising, it is important to exercise with the proper intensity.
SUGGESTED STRETCHES The following stretches can provide a good warm-up or cool-down. Correct form for each stretch is shown in the drawings below. Move slowly as you stretch---never bounce. TOE TOUCH STRETCH Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stret'ches: Hamstrings, back of knees and back.
THr" Tvn 3t.ACY, PLASTXC _PAC_RS ARE:REOUIRE9 I)[ _'rE;P 1 gF" THE ASSEI43LY Dr THE UPPJE'HT$TD Trl£ TRFJ_HILL FRAH_ PAC_ 6 DF TI_ O_l_ HANU/_ _ ARE TO BE _ _N THE LDVER HOLES DNLY _ PL/_"E] INSZl]IE THE; RIrgtT UPRmHT TUBE €3:D AND LEFT UPRIGHT _ (2), VHZLI_.XI'ZSERTZHG THE 3/8" X 3-1/2" )DLT (27) THROUGHTH/_ LDVIER HOLES & " THE _;PACE:R.
PART LIST--Model 18 Key No. Part No. Qty.
EXPLODED DRAWING--Model No. 831.297541 Rl194A lo1 9 2 5 6 14 4 104 30 93 102 94 8 3 11 10 95 42 97 64 91 61 27 16 35 17 41 89 70 48 56 84 23 86 54 / 52 .
ORDERING REPLACEMENT PARTS Each TREADMILL has its own MODEL NUMBER. Always mention this MODEL NUMBER when requesting service or repair parts for your TREADMILL. All parts listed herein can be ordered through SEARS, ROEBUCK AND CO. SERVICE CENTERS and most SEARS RETAIL STORES. If parts you need are not stocked locally, your order will be transmitted to a SEARS PARTS DISTRIBUTION CENTER for handling. WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: • The MODEL NUMBER ofthe product (831.