User's Manual

9
7
B-1
B-1
A-1
6
3
4
joint d
joint e
joint f
1
2
5
HD
HE
6
3
4
1
2
5
HA
HE
6
Add one of the assemblies completed in step 2, to the
assembly completed in step 5.
Use the instructions from steps 3, 4, and 5 to attach the
assemblies. Continue adding the assemblies from step 2 to
complete the circle.
Two Adults
Required for
Assembly
Remove the Standard Nut (HD) and
Washers (HE) at (joint d) and add a
Large Blue Tube (B-1). Replace the
Washer and Nut, however do not
completely tighten (joint d), repeat the
same process for (joint e).
Remove the Standard Nut (HD) and
Washer (HE) at (joint f). Place the added
Large Blue Tubes (B-1) over the bolt in
the order shown. Add a Large Red Tube
(A-1) on the top of (joint f). replace the
Washer (HE) and Standard Nut (HD).
Tighten joint completely.
Complete around the circle.