SDS

Page 3 / 9
RD-0157 - Lifetime® Ultra Sealant – White & Colors
Revision Date 01-Oct-2017
6. ACCIDENTAL RELEASE MEASURES
7. HANDLING AND STORAGE
Specific Hazards Arising from the Chemical
Product is combustible & may ignite if exposed to high temperature or direct flame.
Hazardous Combustion
Products
Carbon, titanium & iron oxides, depending upon formulation.
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full
protective gear. Use water spray to keep fire-exposed containers cool.
Personal Precautions, Protective Equipment and Emergency Procedures
Personal Precautions Wear protective clothing as described in Section 8 of this safety data sheet.
Other Information Small Spills: 1 drum or less – Level D Equipment (gloves, chemical resistant apron, boots &
eye protection).
Large Spills: Rubber gloves, rubber boots, face shield & Tyvek suit as a minimum. Minimum
level of PPE for releases in which the oxygen level is < 19.5% or is unknown, should be
Level B: triple gloves (rubber gloves & nitrile gloves over latex gloves), chemical resistant
suit, fire-retardant clothing & boots, hard hat & self-contained breathing apparatus.
For Emergency Responders Restrict access to spill area.
Environmental Precautions Minimize use of water to prevent environmental contamination. Prevent spill or rinse from
contaminating storm drains, sewers, soil or groundwater. Do not allow discharge containing
this material to enter streams, ponds, estuaries, oceans or other waters unless in
accordance w/ requirements of National Pollutant Discharge Elimination System (NPDES)
permit & permitting authority has been notified in writing prior to discharge. Do not allow
discharge containing this material to enter sewer systems w/o previously notifying local
sewage treatment plant authority. For information, contact State Water Board or EPA
Regional Office
Other: U.S. regulations may require reporting of spills of this material reaching surface
waters if sheen is formed.
Methods and Material for Containment and Cleaning Up
Methods for Containment Prevent further leakage or spillage if safe to do so. Use absorbent material to contain spill.
Methods for Cleaning Up Sweep up absorbed material and shovel into suitable containers for disposal. Wash area
with soap and water. For waste disposal, see section 13 of the SDS.
Precautions for Safe Handling
Advice on Safe Handling Avoid breathing vapors. Use only with adequate ventilation. Open windows & doors to
ensure fresh air cross-ventilation during application and curing. Wash thoroughly with soap
and water after handling. Avoid contact with skin, eyes or clothing. While handling product
keep out of reach of children and pets. Do not eat or drink while handling this material. See
section 6 of this SDS for clean up instructions.
Conditions for Safe Storage, Including any Incompatibilities