Instructions / Assembly
15
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
In order to seat the Poles, strike the end of the Bottom Pole (ALE) very
hard fi ve to six times on a piece of scrap wood or cardboard. This
must be done even if the -IDDLE0OLE!,& covers the slot on the
Bottom Pole before seating has occurred.
./(!2$7!2%2%15)2%$&/24()30!'%
3CRAP7OOD
ATTENTION: THIS STEP CANNOT BE REVERSED!
If the Middle Pole does not completely cover the slot on the Bottom
Pole after seating has occurred, DO NOT COMPLETE ASSEMBLY. Call our
Customer Service Department.
Note: Do not hit your feet with the Pole sections,
as serious injury could occur.
!
WARNING
The Poles must be seated together! Even if the Poles cover
the slots before seating, they must be struck on a hard
surface fi ve to six times! Failure to seat the Poles correctly
could allow the Poles to separate during use, which could
lead to serious personal injuries or property damage.
ALE
!,&
ALH
SEC
SEC