COMPLETE BASKETBALL SYSTEM MODEL N° 90180 OWNER’S MANUAL CO PY OWNER’S MANUAL Keep this Product ID Number and use when contacting Customer Service:
REGISTER YOUR PRODUCT ONLINE AT WWW.LIFETIME.COM At Lifetime, we are committed to providing innovative and quality products. While registering, you will have the opportunity to give us your feedback. Your input is valuable to us. t :PV DBO BMTP PQU JO UP SFDFJWF OFX QSPEVDU OPUJm DBUJPOT PS QSPNPUJPOT t *O UIF VOMJLFMZ FWFOU PG B QSPEVDU SFDBMM PS TBGFUZ NPEJm DBUJPO ZPVS SFHJTUSBUJPO QSPWJEFT UIF JOGPSNBUJPO XF OFFE UP OPUJGZ ZPV directly.
SAFE HANDLING OF THE GLASS BACKBOARD BEFORE & DURING ASSEMBLY 5IPSPVHIMZ JOTQFDU UIF #BDLCPBSE CFGPSF CFHJOOJOH BTTFNCMZ %P OPU VTF UIF #BDLCPBSE JG UIFSF BSF BOZ DIJQT DSBDLT PS PUIFS EFGFDUT JO UIF CPBSE $BMM PVS $VTUPNFS 4FSWJDF %FQBSUNFOU JG BOZ QSPCMFNT BSF GPVOE 6TF FYUSFNF DBVUJPO XIFO IBOEMJOH PS XPSLJOH BSPVOE UIF #BDLCPBSE ,FFQ UPPMT IBSEXBSF BOE PUIFS TIBSQ BOE IFBWZ PCKFDUT BXBZ GSPN UIF #BDLCPBSE /FWFS SFTU UIF #BDLCPBSE EJSFDUMZ PO B IBSE TVSGBDF TVDI BT DPODSFUF PS QBWF
BEFORE BEGINNING ASSEMBLY " ,FFQ UIF IBSEXBSF CBHT BOE UIFJS DPOUFOUT TFQBSBUF *G BOZ QBSUT BSF NJTTJOH DBMM PVS $VTUPNFS 4FSWJDF %FQBSUNFOU # 5FTU m U BMM #PMUT CZ JOTFSUJOH UIFN JOUP UIFJS SFTQFDUJWF IPMFT *G OFDFTTBSZ DBSFGVMMZ TDSBQF BXBZ BOZ FYDFTT QPXEFS DPBUJOH CVJMEVQ GSPN JOTJEF UIF IPMFT %P OPU TDSBQF BXBZ BMM PG UIF QPXEFS DPBUJOH #BSF NFUBM NBZ SVTU :PV NBZ OFFE UP QPVOE TPNF #PMUT JOUP QMBDF XJUI B IBNNFS PS NBMMFU *This system comes in 3 boxes.
ASSEMBLY GUIDES Refer to the following areas throughout the instructions to assist in the assembly process: This area is located at the top, left-hand corner of the page and indicates which tools and hardware are needed to complete the assembly steps on a page. TOOLS AND HARDWARE REQUIRED FOR THIS PAGE This area is usually located in the bottom, left-hand corner of a step and indicates that special attention is needed to perform a particular part of a step.
PARTS LIST ID Item Description CZA Parts Box 1 ALG Pole ",% 6QQFS &YUFOTJPO "SN AKE -PXFS &YUFOTJPO "SN "TTFNCMZ AJR (BT 4QSJOH AKG (BT 4QSJOH $PWFS ALS Lifter Arm AEZ w 3FCBS "&* + #PMU AKT + #PMU 5FNQMBUF CXY Left Cam Plate CXZ 3JHIU $BN 1MBUF AMT 8BSOJOH 4UJDLFS "QQMJFE UP 1PMF Qty 1 2 1 2 2 2 4 4 1 1 1 1 ID Item Description CZB Parts Box 2 "+* #BDLCPBSE CZC Parts Box 3 ALX AKZ ",* AMA CYA AMO AKX ALC AKP Rim Net Lift Handle Rim Cover Plate )BOEMF #SBDLFU 5SJHHFS 1JO )BOEMF -PDL #SBDLFU
PARTS IDENTIFIER Parts shown at 10% of Actual Size AKE Y -PXFS &YUFOTJPO "SN "TTFNCMZ AKZ Y Net AKD Y 6QQFS &YUFOTJPO "SN AJR Y ALX Y (BT 4QSJOH 3JN "TTFNCMZ AKG Y AMA Y (BT 4QSJOH $PWFS Rim Cover Plate AEZ Y w 3FCBS AKI Y Lift Handle ALS Y Lifter Arm AKP Y AEI Y )FJHIU 4UJDLFS + #PMU AKT Y + #PMU 5FNQMBUF 7
PARTS IDENTIFIER Parts shown at 5% of Actual Size ALG Y Pole AJI Y #BDLCPBSE Part shown at 25% of Actual Size CYA Y )BOEMF #SBDLFU CXY Y CXZ Y Left Cam Plate 3JHIU $BN 1MBUF 8 AMO Y AKX Y 5SJHHFS 1JO )BOEMF -PDL #SBDLFU
HARDWARE IDENTIFIER SETUP HARDWARE [CZD] Hardware shown at Actual Size AER Y CYV Y AEO Y w )FY /VU w )FY /VU $PVQMFS w Y w )FY #PMU HANDLE TO POLE ASSEMBLY HARDWARE [CZE] Hardware shown at Actual Size CYL Y AEG Y w Y w (SBEF #PMU w 1MBTUJD 8BTIFS 8 5/8” /PU BDUVBM MFOHUI CYD Y AEH Y w Y w (SBEF #PMU w 1MBTUJD 8BTIFS 8 5/8” /PU BDUVBM MFOHUI DDX Y w Y w (SBEF #PMU CYQ Y DFY Y w Y w 4QBDFS w Y w 4QBDFS CYC Y w
HARDWARE IDENTIFIER EXTENSION ARMS TO POLE ASSEMBLY HARDWARE [CZF] Hardware shown at Actual Size 11 1/4” CYG Y w (SBEF /ZMPDL /VU /PU BDUVBM MFOHUI w Y w (SBEF #PMU CYI Y CYF Y w (SBEF /ZMPDL /VU 8 1/4” /PU BDUVBM MFOHUI w Y w (SBEF #PMU CYJ Y AEG Y w 1MBTUJD 8BTIFS CYM Y w Y w 8BTIFS CYU Y w Y w (SBEF #PMU CYQ Y 9” w Y w 4QBDFS AEH Y w 1MBTUJD 8BTIFS DEF Y /PU BDUVBM MFOHUI w Y w (SBEF #PMU CYO Y w Y
HARDWARE IDENTIFIER BACKBOARD TO POLE ASSEMBLY HARDWARE [BCR] Hardware shown at Actual Size 8 1/4” /PU BDUVBM MFOHUI CYT Y w Y w (SBEF #PMU CYJ Y w Y w (SBEF #PMU CYF Y w (SBEF /ZMPDL /VU CYG Y AEG Y w (SBEF /ZMPDL /VU w 1MBTUJD 8BTIFS AEH Y w 1MBTUJD 8BTIFS POLE TO J-BOLT ASSEMBLY HARDWARE [CZG] Hardware shown at Actual Size ADL Y w /ZMPDL /VU AMS Y CUA Y w /ZMPO $BQ BIP Y w -PDL 8BTIFS w 'MBU 8BTIFS RIM TO BACKBO
SEC 1 SETUP HARDWARE REQUIRED SETUP HARDWARE [CZD] Hardware shown at Actual Size AER Y CYV Y AEO Y w )FY /VU w )FY /VU $PVQMFS w Y w )FY #PMU PARTS REQUIRED Parts shown at 10% of Actual Size AEZ Y w 3FCBS AEI Y + #PMU AKT Y + #PMU 5FNQMBUF TOOLS USED (NOT INCLUDED) 15/16" Wrench Y Carpenter’s Level Shovel 12 Tape Measure Cement ZBSE PS MC CBH Y
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1 15/16” Y OPU BDUVBM TJ[F AER Y SEC 1.
(Not to scale) SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 1 NO HARDWARE REQUIRED FOR THIS PAGE MC #BH Y SEC 1.3 *G ZPV BSF VTJOH DPODSFUF NJY NJY UIF DPODSFUF BDDPSEJOH UP UIF JOTUSVDUJPOT PO UIF CBHT Please note that a thicker mix of concrete will dry stronger. 1PVS UIF DPODSFUF JOUP UIF IPMF TUPQQJOH BCPVU JODIFT GSPN UIF UPQ PG UIF IPMF SEC 1.
SEC 2 HANDLE TO POLE ASSEMBLY HARDWARE REQUIRED HANDLE TO POLE ASSEMBLY HARDWARE [CZE] Hardware shown at Actual Size CYL Y AEG Y w Y w (SBEF #PMU w 1MBTUJD 8BTIFS 8 5/8” /PU BDUVBM MFOHUI CYD Y w Y w (SBEF #PMU 8 5/8” /PU BDUVBM MFOHUI CYC Y w -BSHF 1PMZ 4QBDFS DDX Y w Y w (SBEF #PMU CYQ Y DFY Y w Y w 4QBDFS w Y w 4QBDFS AEH Y CYE Y w 1MBTUJD 8BTIFS w Y w 4QBDFS CYN Y CYF Y CYG Y w /ZMPDL /VU w (SBEF
SEC 2 HANDLE TO POLE ASSEMBLY PARTS REQUIRED Part shown at 5% of Actual Size ALG Y Pole Parts shown at 10% of Actual Size AJR Y (BT 4QSJOH AKG Y (BT 4QSJOH $PWFS AKI Y Lift Handle Part shown at Actual Size ALS Y Lifter Arm Parts shown at 25% of Actual Size AMO Y 5SJHHFS 1JO CYA Y )BOEMF #SBDLFU AKX Y )BOEMF -PDL #SBDLFU TOOLS USED (NOT INCLUDED) 1/2" Wrench Y 3/8" Allen Wrench Y 3/4" Wrench Y 15/16" Wrench Y 1/4" Allen Wrench Y 16 Rubber Mallet
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 8 5/8” 3/4" 3/8" CYD Y OPU BDUVBM MFOHUI OPU BDUVBM TJ[F CYF Y SEC 2.1 CYE Y "UUBDI UIF Handle Brackets (CYA) UP UIF Pole (ALG) XJUI UIF IBSEXBSF TIPXO ! Note: Coat the 1/2” x 8 5/8” Bolt (CYD) lightly with Dark Lithium Grease (AJZ) before performing this step. ALG CYD CYE CYE CYA CYF CYA ! ! Note: DO NOT overtighten the hardware. The Handle Brackets must move freely around the Bolt.
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 8 5/8” 3/4" 3/8" CYD Y OPU BDUVBM MFOHUI OPU BDUVBM TJ[F CYF Y SEC 2.2 CYE Y "UUBDI UIF Handle Assembly (AKI) UP UIF )BOEMF #SBDLFUT VTJOH UIF IBSEXBSF TIPXO JO UIF MPDBUJPO JOEJDBUFE .BLF TVSF UIF 1/2” x 1.44” Spacers (CYE) BSF JOTUBMMFE JO UIF HBQ CFUXFFO UIF )BOEMF #SBDLFU BOE UIF )BOEMF "TTFNCMZ CYE CYD CYE AKI CYF ! Note: Coat the 1/2” x 8 5/8” Bolt (CYD) lightly with Dark Lithium Grease (AJZ) before performing this step.
3/4" SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 2 3/8" CYF Y 8 5/8” AEG Y OPU BDUVBM MFOHUI CYD Y SEC 2.3 4FDVSF UIF )BOEMF "TTFNCMZ UP UIF )BOEMF #SBDLFUT VTJOH UIF IBSEXBSF TIPXO JO UIF TFU PG IPMFT BU UIF FOE PG UIF )BOEMF #SBDLFUT .BLF TVSF UIF 1/2” Plastic Washers (AEG) BSF QMBDFE CFUXFFO UIF )BOEMF #SBDLFUT BOE UIF )BOEMF "TTFNCMZ AEG ! AEG Note: Coat the 1/2” x 8 5/8” Bolt (CYD) lightly with Dark Lithium Grease (AJZ) before performing this step. CYD CYF ! SEC 2.
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 5” 1/2" 1/4" SEC 2.5 CYL Y OPU BDUVBM MFOHUI CYN Y -JOF VQ UIF IPMFT JO UIF Gas Spring Cover (AKG) and Gas Spring (AJR) XJUI UIPTF PO UIF QPMF CSBDLFUT 4FDVSF UIF (BT 4QSJOHT BOE (BT 4QSJOH $PWFST UP UIF 1PMF VTJOH UIF IBSEXBSF TIPXO Pole Brackets Line up the holes CYL CYN ! Note: Do NOT overtighten the hardware. The Gas Springs need to rotate freely on the pole brackets.
NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE SEC 2.6 4MJEF UIF Trigger Pin (AMO) UISPVHI UIF VQQFS TFU PG IPMFT JO UIF Gas Springs (AJR).
15/16" SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 3/8” 8 5/8” CYC Y CYQ Y CYG Y OPU BDUVBM MFOHUI DDX Y SEC 2.7 2 AEH Y DFY Y OPU TIPXO BU BDUVBM TJ[F )BWF POF BEVMU IPME UIF Lifter Arms (ALS) JO QMBDF BT TIPXO "UUBDI UIF -JGUFS "SNT UP UIF Handle Assembly (AKI) XJUI UIF 5/8” x 8 5/8” Grade 8 Bolt (DDX) .
SEC 3 EXTENSION ARMS TO POLE ASSEMBLY HARDWARE REQUIRED EXTENSION ARMS TO POLE ASSEMBLY HARDWARE [CZF] Hardware shown at Actual Size 11 1/4” CYG Y w (SBEF /ZMPDL /VU /PU BDUVBM MFOHUI w Y w (SBEF #PMU CYI Y CYF Y w (SBEF /ZMPDL /VU 8 1/4” /PU BDUVBM MFOHUI w Y w (SBEF #PMU CYJ Y AEG Y w 1MBTUJD 8BTIFS CYM Y w Y w 8BTIFS CYU Y w Y w (SBEF #PMU CYQ Y 9” w Y w 4QBDFS AEH Y w 1MBTUJD 8BTIFS DEF Y /PU BDUVBM MFOHUI
SEC 3 EXTENSION ARMS TO POLE ASSEMBLY PARTS REQUIRED Parts shown at 10% of Actual Size AKE Y -PXFS &YUFOTJPO "SN "TTFNCMZ AKD Y 6QQFS &YUFOTJPO "SN Parts shown at 25% of Actual Size CXY Y CXZ Y Left Cam Plate 3JHIU $BN 1MBUF TOOLS USED (NOT INCLUDED) 3/4" Wrench 15/16" Wrench 3/8" Allen Wrench 24 Rubber Mallet
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 3 3/8" 11 1/4” OPU BDUVBM TJ[F CYP Y CYG Y OPU BDUVBM MFOHUI 15/16” SEC 3.1 CYI Y Slide a 5/8” x 11 1/4” Bolt (CYI) UISPVHI POF 5/8” x 2.9” Rubber Spacer (CYP) UISPVHI UIF 1PMF BOE UISPVHI BOPUIFS w Y w 4QBDFS BOE TFDVSF XJUI UIF B 5/8” Grade 2 Nylock Nut (CYG) 6TF B 3VCCFS .BMMFU JG OFDFTTBSZ UP UBQ UIF #PMU into place. CYI CYP CYG CYP CAUTION ! 5IF -JGUFS "SNT (ALS) will move freely if left unattended.
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE CYF Y 3/4” 3/8" CYM Y CYU Y SEC 3.2 "UUBDI UIF Left Cam Plate (CXY) BOE UIF Right Cam Plate (CXZ) UP UIF FOE PG UIF Lower Extension Arm Assembly (AKE) VTJOH UIF IBSEXBSF TIPXO .
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 3 3/8” 11 1/4” OPU BDUVBM TJ[F CYG Y CYQ Y OPU BDUVBM TJ[F OPU BDUVBM MFOHUI 15/16 SEC 3.3 AEH Y CYI Y "UUBDI UIF Lower Extension Arm Assembly (AKE) UP UIF 1PMF VTJOH UIF IBSEXBSF TIPXO .
OPU BDUVBM MFOHUI CYG Y CYJ Y SEC 3.4 3 8 1/4” 3/8” 15/16” SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE OPU BDUVBM TJ[F CYO Y OPU BDUVBM TJ[F AEH Y 4FDVSF UIF Lifter Arms (ALS) UP UIF Lower Extension Arm Assembly (AKE) VTJOH UIF IBSEXBSF TIPXO .BLF TVSF UIF 5/8” x 4 3/4” Spacer (CYO) JT CFUXFFO UIF UXP -JGUFS "SNT .
CYF Y 3/8" 3/4” SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 9” DEF Y SEC OPU BDUVBM MFOHUI AEG Y "UUBDI CPUI Upper Extension (AKD) "SNT VTJOH UIF IBSEXBSF TIPXO 3.5 AEG DEF AEG AEG AEG CYF AKD AKD ! Note: Coat the 1/2” x 9” Bolt (DEF) lightly with Dark Lithium Grease (AJZ) before performing this step.
SEC 4 BACKBOARD TO POLE ASSEMBLY HARDWARE REQUIRED BACKBOARD TO POLE ASSEMBLY HARDWARE [BCR] Hardware shown at Actual Size 8 1/4” CYJ Y /PU BDUVBM MFOHUI CYT Y w Y w (SBEF #PMU w Y w (SBEF #PMU CYF Y CYG Y AEG Y w (SBEF /ZMPDL /VU w 1MBTUJD 8BTIFS AEH Y w 1MBTUJD 8BTIFS PARTS REQUIRED Part shown at 5% of Actual Size AJI Y #BDLCPBSE TOOLS USED (NOT INCLUDED) 3/4" Wrench 15/16" Wrench 3/8" Allen Wrench 30 w (SBEF /ZMPDL /VU
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 8 1/4” 3/8" OPU BDUVBM MFOHUI CYG Y AEH Y CYJ Y 15/16” At least three adults are required to complete this portion of the assembly. To prevent serious injuries, the Pole should be held down by one adult at all times. SEC "UUBDI UIF Lower Extension Arms (AKE) UP UIF Backboard (AJI) VTJOH UIF IBSEXBSF TIPXO 4.
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 3/4” 3/8" CYT Y CYF Y AEG Y SEC "UUBDI UIF Upper Extension Arm (AKD) UP UIF Backboard (AJI) VTJOH UIF IBSEXBSF TIPXO 4.2 AKD AKD AEG AEG CYF CYT AEG AKD ! Note: Repeat this step to attach the other Upper Extension Arm to the Backboard.
SEC 5 POLE TO J-BOLT TEMPLATE ASSEMBLY HARDWARE REQUIRED POLE TO J-BOLT ASSEMBLY HARDWARE [CZG] Hardware shown at Actual Size CUA Y w -PDL 8BTIFS ADL Y w /ZMPDL /VU BIP Y w 644 8BTIFS PARTS REQUIRED NO NEW PARTS REQUIRED FOR THIS SECTION TOOLS USED (NOT INCLUDED) 15/16” Wrench Carpenter’s Level Y Y ! Note: DO NOT PROCEED with this Section untill the concrete from Section 1 has been allowed to cure over at least 72 hours (3 days).
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 5 15/16” CUA Y BIP Y OPU BDUVBM TJ[F SEC 4UBDL B 5/8” Lock Washer (CUA) and a 5/8” USS Washer (BIP) POUP UIF FYQPTFE FOET PG UIF J-Bolts (AEI) 5.1 BIP CUA AEI ! SEC 5.2 Note: DO NOT PROCEED untill the concrete from Section 1 has been allowed to cure over at least 72 hours (3 days).
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 5 15/16” AMS Y ADL Y BIP Y OPU BDUVBM TJ[F SEC 5.3 )BWF BU MFBTU mWF QFPQMF TVQQPSU UIF 1PMF BT POF QFSTPO TMJEFT B 5/8” Flat Washer (BIP) onto to UIF FOE PG FBDI + #PMU BOE TFDVSF UIF 1PMF JOUP QPTJUJPO XJUI B 5/8” Nylock Nut (ADL). SEC 5.4 A MINIMUM OF THREE ADULTS ARE REQUIRED FOR THIS STEP.
SEC 6 RIM TO BACKBOARD ASSEMBLY HARDWARE REQUIRED RIM TO BACKBOARD ASSEMBLY HARDWARE [BCS] Hardware shown at Actual Size ADU Y ABY Y .
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 6 9/16” Y ABY Y AAF Y Y AAA Y SEC Slide a 3/8” Flat Washer (AAF) onto to a 3/8” x 1 3/4” Hex Bolt (ABY) %P UIJT GPS UXP 8BTIFST BOE #PMUT 6.1 AAF SEC 6.
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 6 9/16” Y ABY Y AAF Y AAA Y SEC 6.
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 9/16” ADU Y SEC "EKVTU UIF UFOTJPO PG UIF Rim (ALX) CZ UJHIUFOJOH UIF /VUT BU UIF CPUUPN PG UIF 4QSJOHT XJUI B 8SFODI 6.4 ALX ! SEC Note: DO NOT COMPLETELY TIGHTEN THE NUTS IN THIS STEP! Only tighten the Nuts until the Rim does not wobble. Nuts "UUBDI Rim Cover Plate (AMA) UP UIF 3JN VTJOH UIF IBSEXBSF TIPXO 6.
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 6 NO HARDWARE REQUIRED FOR THIS PAGE SEC 6.
SEC TOOLS AND HARDWARE REQUIRED FOR THIS PAGE 6 NO TOOLS OR HARDWARE REQUIRED FOR THIS PAGE SEC 6.
SEC 7 REMOVING THE BACKBOARD DISASSEMBLE THE SYSTEM In the event the Backboard should need replacing, please follow the instructions below. Never remove the Backboard from the system without first dissasembling the system as instructed. At least six adults are required to complete the following steps: SEC 3FNPWF UIF 5/8” Nylon Caps (AMS) GSPN FBDI + #PMU 7.1 SEC 7.
OPERATION OF HEIGHT ADJUSTMENT SYSTEM 5IF CBTLFUCBMM TZTUFN NBZ CF BEKVTUFE GSPN GFFU UP GFFU 50 3"*4& 03 -08&3 5)& )001 B (SBTQ UIF )BOEMF "TTFNCMZ mSNMZ BOE QSFTT UIF )BOEMF EPXOXBSE UP SBJTF UIF IPPQ .
WARNING t 'BJMVSF UP DPNQMZ XJUI UIFTF XBSOJOHT DPVME SFTVMU JO CSPLFO CPOFT DVUT OFSWF EBNBHF TQJOBM DPSE PS CSBJO JOKVSZ PS EFBUI t %0 /05 BMMPX DIJMESFO UP BEKVTU UIF VOJU t %0 /05 )"/( '30.
ENHANCE YOUR LIFETIME® PURCHASE BY ADDING ACCESSORIES OR OTHER GREAT PRODUCTS: To purchase accessories or other Lifetime Products, visit us at: www.lifetime.
WARRANTY INFORMATION LIFETIME BASKETBALL EQUIPMENT LIMITED LIFETIME FACTORY WARRANTY THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE.
