user manual

27
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
SEC
3ECURETHE2OOF4RUSS"RACETOTHE4RUSS'UTTER#HANNELUSINGTWO#10 x 3/8” Pan-Head Screws (ADY)ANDTWO
#10 Cap Nuts (ADK). Repeat this step for the other end of the Roof Truss Brace.
ADYX
ADKX
Note: The Cap Nuts goes on the outside of the Truss.
!
ADY
ADK
ADK
WARNING
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department. Exposed threads
on the end of the Bolt may cause serious injuries.
SEC
Lay the Truss Assembly on its side, and align the holes in a Roof Truss Brace (AFG) with those circled on the Truss
'UTTER#HANNELSASSHOWN
AFG
3/8”
3
3.3
3.4