Installation Guide

System Operation

Cleaning

Use only non-abrasive, non-petroleum products to clean the pump.

What to Expect

This toilet operates on a different principle than a typical siphon toilet, resulting in a different sound

and flush action. When activated, the pump pulses a few times.

Prime the Pump

If pump initially runs for more than 10 seconds, prime the pump as follows:

a. Unplug cord from wall outlet.

b. Wait 15 seconds. Plug cord back into wall outlet.

c. Flush

again. If pump runs more than 10 seconds, repeats steps a-c

Winterization

If the Lift Assure system is exposed to freezing temperatures, please make sure that all fixtures,

inlets, and discharge lines are winterized using non-toxic propylene glycol (RV Marine AntiFreeze).

Use sufficient quantity of antifreeze to ensure all pipes are protected.

First, you must shut off the water supply. Flush toilet to empty the tank. Pour RV/Marine Anti

freeze

into toilet and all fixtures. Press manual switch to run antifreeze through system.

Clearing Debris from Pump

While the Lift Assure does not need any maintenance under normal conditions, it is okay to clean

out the macerating unit once a year. Do not use bleach. The macerating unit starts automatically

once the toilet is flushed or the other bathroom appliance discharge and ceases operation once the

contents have finished pumping.