Use and Care Manual

Model: DSQR70BNOR Page 8
CLEANING AND MAINTENANCE THE VENTILATION FAN
Cleaning the unit periodically is advisable since dust, molds, grease, and other dirt particles can affect the
conductivity of the air in the unit.
WARNING:
Disconnect power supply before servicing. See SAFETY INFORMATION before proceeding. Routine
maintenance should be done at least once a year.
CAUTION:
Never use solvents, thinner or harsh chemicals for cleaning the fan.
Do not allow water to enter the motor.
Do not immerse resin parts in water over 140℉.
1) Carefully unscrew finial cap and finial nut to remove from the bath fan grille.
2) Clean glass shade with a soft towel or paper towels and glass cleaner (avoid harsh detergent) in a sink.
3) Clean inside of unit with a vacuum cleaner. Do not use liquid cleaner, as the motor should not come in
contact with any liquid.
4) Dry the bath fan shade and grille with a soft towel or paper towels.
5) Put the grille back in place.