The Chamberlain Group 845 Larch Ave. Elmhurst, IL 60126-1196 www.liftmaster.
PROGRAMMING » KEYPAD NOTE: Use the STAR Key “*” to cancel any input. PROGRAMMING INSTRUCTION SYNTAX KEYSTROKES General Programming Master Code + Command 1234 + 1 (12,123) Code Programming Master Code + Command + Code 1234 + 1 (12) + 1234 Relay Programming Master Code + Command + Setting 1234 + 123 + 1234 Level Adjustment Master Code + Command + Setting 1234 + 12 + 1-3 NOTE: Keypad commands are to be entered in a single string to result in success (indicated by double high success tone).
PROGRAMMING » KEYPAD CODE SETUP The unit’s Master Code is for owner/administrator level commands. The User Codes allow users to activate and latch relays 1 and 2. NOTE: The User Code cannot be the same as the Master Code. DELETE USER CODE NUMBERS ENTER A USER CODE NUMBERS 1. Enter the Master Code: will beep. ? ? 9 2. Enter the Program Code: ? ? The unit 1. Enter the Master Code: beep. The unit will beep. ? 2. Enter the Program Code: 3.
PROGRAMMING » TELEPHONE TELEPHONE PROGRAMMING ENABLE INTERCOM MODE ADJUST “PICK UP” RING COUNT 0 Enter the command tone: 3 2. Enter the ring count: ENABLE TELCO MODE 0 Enter the command tone: 7 2 0 5 through ENABLE ALTERNATE DTMF PROGRAMMING This feature changes the first programming digit from to # ENABLE STANDARD (LONG) RING TONE 1 Enter the command tone: 1 1.
PROGRAMMING » QUICK REFERENCE KEYPAD PROGRAMMING PROGRAMMING NUMBER DESCRIPTION OF TASK FACTORY SETTING PROGRAMMING PROCEDURE 1 Trigger Relay One Master Code (4 digits) + 1 2 Trigger Relay Two Master Code (4 digits) + 2 7 Delete User Code Master Code (4 digits) + 7 + User Code that is to be deleted (4 digits) 9 Enter User Code Master Code (4 digits) + 9 + New User Code (4 digits) + Relay Associated with the User Code (1 or 2) 03 Enable Intercom (No-Telco) Mode Master Code (4 digits) + 03
PROGRAMMING » QUICK REFERENCE TELEPHONE PROGRAMMING PROGRAMMING NUMBER DESCRIPTION OF TASK FACTORY SETTING **01 Enable Call Forwarding **02 Disable Call Forwarding **03 Enable Intercom Mode Disabled **03 **06 Verify Call Forwarding Number (Via Caller ID) Disabled **06 **07 Enable Telco Mode Disabled **07 **#8 Erase Call Forwarding Number **10 Adjust Ring Count **13 Enable Alternate DTMF Programming **14 Enable Standard (Long) Ring Tone **15 Enable Alternate (Dual) Ring Tone #*16
PROGRAMMING » RESIDENT INSTRUCTIONS FOR TAC MODELS DIRECT COMMANDS FROM THE LOCAL TELEPHONE Direct commands allow you to control the unit from the resident telephone. To use direct commands lift the handset, wait for dial tone and enter the direct command.
LIMITED WARRANTY The Chamberlain Group, Inc. (“Seller”) warrants to the first purchaser of this product, for the structure in which this product is originally installed, that it is free from defect in materials and/or workmanship for a period of one year from the date of purchase. The proper operation of this product is dependent on your compliance with the instructions regarding installation, operation, maintenance and testing.
